engine based on Intersil鈥檚 second generation FlexiHash鈩?/div>
technology. The device authentication is achieved through a
challenge-response scheme customized for low-cost
applications, where cloning via eves-dropping without
knowledge of the device鈥檚 secret code is not economically
viable. When used for its intended applications, the ISL9206
offers the same level of effectiveness as other significantly
more expensive high maintenance monetary-grade hash
algorithm and authentication schemes.
The ISL9206 has a wide operating voltage range, and is
suitable for direct powering from a 1-cell Li-Ion/Li-Poly or a
3-cell series NiMH battery pack. The ISL9206 can also be
powered by the XSD bus when the bus pull-up voltage is
3.3V or higher. The device connects directly to the cell
terminals of a battery pack, and includes on-chip voltage
regulation circuit, POR, and a non-crystal based oscillator for
bus timing reference.
Communication with the host is achieved through a single-
wire XSD interface - a light-weight subset of Intersil鈥檚 ISD bus
interface. The XSD bus is compatible for use with serial ports
offered by all 8250 compatible UART鈥檚 or a single GPIO
(general purpose input and output) pin of a microprocessor.
A clone prevention solution utilizing the ISL9206 offers
safety and revenue protection at the lowest cost and power,
and is suitable for protection against after-market
replacement for a wide variety of low-cost applications.
Features
鈥?Challenge-response based authentication scheme using
32-bit challenge code and 8-bit authentication code
鈥?Fast and flexible authentication process. Multi-pass
authentication can be used to achieve the highest security
level if necessary
鈥?16x8 OTP ROM stores up to three sets of 32-bit host-
selectable secrets with additional programmable memory
for storage of up to 48 bits of ID code and/or pack
information
鈥?FlexiHash+ engine uses two sets of 32-bit secrets for
authentication code generation
鈥?Non-unique mapping of the secret key to an 8-bit
authentication code maximizes hacking difficulty due to
need for exhaustive key search (superior to SHA-1)
鈥?Supports 1-cell Li-Ion/Li-Poly and 3-cell series NiMH
battery packs (2.6V ~ 4.8V operation), or powered by the
XSD bus
鈥?XSD single-wire host bus interface communicates with all
8250-compatible UART鈥檚 or a single GPIO. Supports CRC
on read data and transfer bit-rate up to 23kbps
鈥?True 鈥淶ero Power鈥?sleep mode - automatically entered
after a bus inactivity time-out period
鈥?5 Ld SOT-23 package
鈥?-20擄C to +85擄C operating temperature range
鈥?Pb-free plus anneal available (RoHS compliant)
Ordering Information
PART #
(NOTE)
PART
TEMP.
MARKING RANGE (擄C)
-20 to +85
PACKAGE
(Pb-Free)
PKG.
DWG. #
Applications
鈥?Battery pack authentication
鈥?Printer cartridges
鈥?Add-on accessories
鈥?Other non-monetary authentication applications
ISL9206DHZ-T 206Z
5 Ld SOT23-5 P5.064
Tape and Reel
ISL9206EVAL1 ISL9206 Evaluation Kit
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Related Literature
鈥?Application Note AN1237 鈥淚SL9206 Evaluation Kit鈥?/div>
鈥?Application Note AN1167 鈥淚mplementing XSD Host Using
a GPIO鈥?/div>
鈥?Technical Brief TB363 鈥淕uidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)鈥?/div>
Pinout
ISL9206 (SOT23-5)
TOP VIEW
VSS 1
N/C 2
VDD 3
4 TIO
5 XSD
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2006. All Rights Reserved.
FlexiHash is a trademark of Intersil Americas Inc. All other trademarks mentioned are the property of their respective owners.
next