USB3318
Hi-Speed USB Transceiver
with 1.8V-3.3V ULPI Interface -
13MHz Reference Clock
PRODUCT FEATURES
USB-IF 鈥淗i-Speed鈥?compliant to the Universal Serial
Bus Specification Rev 2.0
Interface compliant with the ULPI Specification
revision 1.1 as a Single Data Rate (SDR) PHY
1.8V to 3.3V IO Voltage (+/- 10%)
SMSC flexPWR
TM
Technology
鈥?Low current design ideal for battery powered
applications
鈥?鈥淪leep鈥?mode tri-states all ULPI pins and places the
part in a low current state
Data Brief
Carkit UART mode for non-USB serial data transfers
Industrial Operating Temperature -40擄C to +85擄C
Packaging Options
鈥?24 pin QFN lead-free RoHS compliant package
(4 x 4 x 0.90 mm height)
Applications
The USB3318 is targeted for any application where a Hi-
Speed USB connection is desired and when board
space, power, and interface pins must be minimized.
The USB3318 is well suited for:
Cell Phones
PDAs
MP3 Players
GPS Personal Navigation
Scanners
External Hard Drives
Digital Still and Video Cameras
Portable Media Players
Entertainment Devices
Printers
Set Top Boxes
Video Record/Playback Systems
IP and Video Phones
Gaming Consoles
POS Terminals
Supports FS pre-amble for FS hubs with a LS device
attached (UTMI+ Level 3)
Supports HS SOF and LS keep-alive pulse
Includes full support for the optional On-The-Go
(OTG) protocol detailed in the On-The-Go
Supplement Revision 1.0a specification
Supports the OTG Host Negotiation Protocol (HNP)
and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery
power in OTG applications
Support OTG monitoring of VBUS levels with internal
comparators
鈥淲rapper-less鈥?design for optimal timing performance
and design ease
鈥?Low Latency Hi-Speed Receiver (43 Hi-Speed clocks
Max) allows use of legacy UTMI Links with a ULPI
bridge
Internal 5V cable short-circuit protection of ID, DP
and DM lines to VBUS or ground
13MHz Reference Clock operation
鈥?0 to 3.6V input drive tolerant
鈥?Able to accept 鈥渘oisy鈥?clock sources
Internal low jitter PLL for 480MHz Hi-Speed USB
operation
Internal detection of the value of resistance to ground
on the ID pin
Integrated battery to 3.3V LDO regulator
鈥?2.2uF bypass capacitor
鈥?100mV dropout voltage
Integrated ESD protection circuits
鈥?Up to +-15kV without any external devices
SMSC USB3318
PRODUCT PREVIEW
Revision 1.3 (11-02-07)
SMSC
1
2
3
4
5
6
7
8
