DATA SHEET
MOS INTEGRATED CIRCUIT
碌
PD6604
4-BIT SINGLE-CHIP MICROCONTROLLER
FOR INFRARED REMOTE CONTROL TRANSMISSION
DESCRIPTION
Equipped with low-voltage 1.8 V operation, a carrier generation circuit for infrared remote control transmission,
a standby release function through key entry, and a programmable timer, the
碌
PD6604 is suitable for infrared remote
control transmitters.
For the
碌
PD6604, we have made available the one-time PROM product
碌
PD66P04B for program evaluation or
small-quantity production.
FEATURES
鈥?Program memory (ROM)
鈥?Data memory (RAM)
鈥?9-bit programmable timer
鈥?Command execution time
鈥?Stack level
鈥?I/O pins (K
I/O
)
鈥?Input pins (K
I
)
鈥?Sense input pin (S
0
)
鈥?S
1
/LED pin (I/O)
鈥?Power supply voltage
: 1002
脳
10 bits
: 32
脳
4 bits
: 1 channel
: 8
碌
s (when operating at f
OSC
= 1 MHz: RC oscillation)
: 1 level (Stack RAM is for data memory RF as well.)
: 8 pins
: 4 pins
: 1 pin
: 1 pin (When in output mode, this is the remote control transmission
display pin.)
: V
DD
= 1.8 to 3.6 V (when operating at f
OSC
= 500 kHz)
V
DD
= 2.2 to 3.6 V (when operating at f
OSC
= 1 MHz)
鈥?Operating ambient temperature : T
A
= 鈥?0 to + 85
擄C
鈥?Oscillator frequency
鈥?POC circuit (Mask option)
: f
OSC
= 300 kHz to 1 MHz
鈥?Built-in carrier generation circuit for infrared remote control
APPLICATION
Infrared remote control transmitter (for key-less entry)
Because the
碌
PD6604 uses an RC oscillation system clock, its accuracy and stability are lower than
the models using ceramic oscillation.
In applications where the clock accuracy and stability pose a problem, use the
碌
PD6134 (ceramic
oscillation type).
The information in this document is subject to change without notice.
Document No. U11281EJ3V0DS00 (3rd edition)
Date Published March 1999 N CP(K)
Printed in Japan
The mark
shows major revised points.
漏
1996