鈥?/div>
Internal Voltage Clamp Protects
Transformer from Over-voltage
(UCC3973)
DESCRIPTION
Design goals for a Cold Cathode Fluorescent Lamp (CCFL) converter used
in a notebook computer or portable application include small size, high effi-
ciency, and low cost. The UCC3972/3 CCFL controllers provide the neces-
sary circuit blocks to implement a highly efficient CCFL backlight power
supply in a small footprint 8 pin TSSOP package. The BiCMOS controllers
typically consume less than 1mA of operating current, improving overall
system efficiency when compared to bipolar controllers requiring 5mA to
10mA of operating current.
External parts count is minimized and system cost is reduced by integrat-
ing such features as a feedback controlled PWM driver stage, open lamp
protection, startup delay and synchronization circuitry between the buck
and push-pull stages. The UCC3972/3 include an internal shunt regulator,
allowing the part to operate with input voltages from 4.5V up to 25V. The
part supports both analog and externally generated low frequency dimming
modes of operation.
The UCC3973 adds a programmable voltage clamp at the BUCK pin. This
feature can be used to protect the transformer from overvoltage during
startup or when an open lamp occurs. Transformer voltage is controlled by
reducing duty cycle when an over-voltage is detected.
C6 27pF
TYPICAL APPLICATION CIRCUIT
UCC3972
UCC3973
NO INTERNAL VOLTAGE CLAMP
INTERNAL VOLTAGE CLAMP LIMITS TRANSFORMER
VOLTAGE AT START-UP OR DURING FAULT
T1
SYSTEM VOLTAGE
(4.5V TO 25V)
R2 1k
R1
1k鈩?/div>
C1
6.8碌F
C5 0.1碌F
UCC3972/3
D1
R10
Q2
8
C2
1碌F
VDD
VBAT
2
C7
0.1碌F
R11
Q3
LAMP
HV
6
GND
BUCK
5
C3
1碌F
MODE
1
L1
68碌H
LAMP
LV
ANALOG
DIMMING
3
COMP
R6 75鈩?/div>
OUT
7
R3 68k
R5 10k
FB
4
LOW FREQUENCY DIMMING
D2
R4 750
C4 33nF
D
LFD
R
LFD
68k
0V-5V LOW FREQUENCY CONTROL SIGNAL
UDG-99154
SLUS252A - JANUARY 2000
next