UCC283-3, UCC283-5, UCC283-ADJ, UCC383-3, UCC383-5, UCC383-ADJ
LOW DROPOUT 3 A LINEAR REGULATOR FAMILY
SLUS215A 鈥?OCTOBER 1998 鈥?REVISED JUNE 2000
D
Precision Positive Linear Series Pass
D
D
D
D
D
D
D
D
D
Voltage Regulation
0.45 V Dropout at 3 A
50 mV Dropout at 10 mA
Quiescent Current Under 650
碌A(chǔ)
Irrespective of Load
Adjustable (5-Lead) Output Voltage Version
Fixed (3-Lead) Versions for 3.3-V and 5-V
Outputs
Logic Shutdown Capability
Short-Circuit Power Limit of
(3%
脳
V
IN
脳
I
SHORT
)
Low V
OUT
to V
IN
Reverse Leakage
Thermal Shutdown
TO鈥?63鈥? TD PACKAGE
(FRONT VIEW)
5
4
3
2
1
VOUT
ADJ
GND
CT
VIN
TO鈥?63鈥? TD PACKAGE
(FRONT VIEW)
3
2
1
VOUT
GND
VIN
TO鈥?20鈥? T PACKAGE
(FRONT VIEW)
5
4
3
2
1
VOUT
ADJ
GND
CT
VIN
+
TO鈥?20鈥? T PACKAGE
(FRONT VIEW)
3
2
1
VOUT
GND
VIN
description
The UCC283鈥?/鈥?/鈥揂DJ family of positive linear
series pass voltage regulators are tailored for
low-drop-out applications where low quiescent
power is important. Fabricated with a BiCMOS
technology ideally suited for low input-to-output
differential applications, the UCC283鈥? passes
3 A while requiring only 0.45 V of typical input
voltage headroom (ensured 0.6-V dropout).
+
These regulators include reverse voltage sensing that prevents current in the reverse direction. Quiescent
current is always less than 650
碌A(chǔ).
These devices have been internally compensated in such a way that the
need for a minimum output capacitor has been eliminated.
UCC283鈥? and UCC283鈥? versions are in 3-lead packages and have preset outputs at 3.3 V and 5.0 V
respectively. The output voltage is regulated to 1.5% at room temperature. The UCC283鈥揂DJ version, in a
5-lead package, regulates the output voltage programmed by an external resistor ratio.
Short-circuit current is internally limited. The device responds to a sustained overcurrent condition by turning
off after a t
ON
time delay. The device then stays off for a period, t
OFF
, that is 32 times the t
ON
delay. The device
then begins pulsing on and off at the t
ON
/(t
ON
+t
OFF
) duty cycle of 3%. This drastically reduces the power
dissipation during short-circuit and means heat sinks need only accommodate normal operation. On the
3-leaded versions of the device t
ON
is fixed at 750
碌s,
on the adjustable 5-leaded versions an external capacitor
sets the on time. The off time is always 32
脳
t
ON
. The external timing control pin, CT, on the 5-leaded versions
also serves as a shutdown input when pulled low.
Internal power dissipation is further controlled with thermal overload protection circuitry. Thermal shutdown
occurs if the junction temperature exceeds 165擄C. The chip remains off until the temperature has dropped 20擄C.
The UCC283 series is specified for operation over the industrial range of 鈥?0擄C to 85擄C, and the UCC383 series
is specified from 0擄C to 70擄C. These devices are available in 3- and 5-pin TO鈥?20 and TO鈥?63 power packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
漏
2000, Texas Instruments Incorporated
POST OFFICE BOX 655303
鈥?/div>
DALLAS, TEXAS 75265
1
1
2
3
4
5
6
7
8
9
10
11
