Type 240 Display and Type 241 Display
and Keypad for Series D200 Amplifiers
The
Type 240
provides a simple display of the calibrated output from
the 200 Series Amplifiers. In addition to displaying the output it can
display any number or seven-segment message (PASS, RUN, STOP etc)
transmitted from the host PC. The display has three LED lamps to
indicate display status, trip status or display units.
The
Type 241
has the same features as the Type 240 plus four keys
which allow you to enter the set-up menu and calibrate the amplifier
and sensor. The menu variables include display damping, zero and
span settings and trip settings. The keys can also be used to tare the
display value or toggle between the units displayed i.e. Lbs/Kg.
By using the Type 241 display the amplifier can be calibrated or reset
without using a PC, which can be very useful in remote locations.
Both displays are supplied in wall mounting enclosures, sealed to IP66
and are suitable for mounting in hostile environments. The power
supply for the display is derived from the 200 series amplifier.
Display
Enclosure
Connection
metres
4 red LED digits 12.7mm high and minus sign
80mm x 80mm x 50mm
maximum recommended cable length to amplifier 5
Complimentary Products
201
202
208
221
222
243
Single Channel Digital Strain Gauge Amplifier
Dual Channel Digital Strain Gauge Amplifier
Eight Channel Digital Strain Gauge Amplifier
Four Channel Relay Card
12 bit D/A Output Card
RS485 Display and Keypad
Datum Electronics Limited
Park Road, Ryde, Isle of Wight, PO33 2BE
Tel: +44 (0)1983 810310
Fax: +44 (0)1983 810318
e-mail:
sales@datum-electronics.co.uk
www.datum-electronics.co.uk
1
