鈥?/div>
Synchronous, 95% Efficient, Boost Converter
With 500-mA Output Current From 1.8-V Input
Integrated 200-mA Reverse Voltage Protected
LDO for DC/DC Output Voltage Post Regu-
lation or Second Output Voltage
40-碌A(chǔ) (Typical) Total Device Quiescent Cur-
rent
Input Voltage Range: 1.8-V to 5.5-V
Fixed and Adjustable Output Voltage Options
up to 5.5-V
Power Save Mode for Improved Efficiency at
Low Output Power
Low Battery Comparator
Power Good Output
Low EMI-Converter (Integrated Antiringing
Switch)
Load Disconnect During Shutdown
Overtemperature Protection
Available in a Small 4mm x 4mm QFN-16 or in
a TSSOP-16 Package
DESCRIPTION
The TPS6112x devices provide a complete power
supply solution for products powered by either a
one-cell Li-Ion or Li-Polymer or a two up to 4 cells
Alkaline, NiCd or NiMH batteries. The devices can
generate two stable output voltages that are either
adjusted by an external resistor divider or fixed
internally on the chip. It also provides a simple
solution for generating 3.3 V out of a one-cell Li-Ion
or Li-Polymer battery at a maximum output current of
at least 200 mA with supply voltages down to 1.8 V.
The implemented boost converter is based on a fixed
frequency, pulse-width-modulation (PWM) controller
using a synchronous rectifier to obtain maximum
efficiency. The maximum peak current in the boost
switch is limited to a value of 1600 mA.
The converter can be disabled to minimize battery
drain. During shutdown, the load is completely dis-
connected from the battery. A low-EMI mode is
implemented to reduce ringing and in effect lower
radiated electromagnetic energy when the converter
enters the discontinuous conduction mode. A power
good output at the boost stage simplifies control of
any connected circuits like cascaded power supply
stages or microprocessors.
The built-in LDO can be used for a second output
voltage derived either from the boost output or
directly from the battery. The LDO can be enabled
separately i.e., using the power good of the boost
stage. The device is packaged in a 16-pin QFN
package measuring 4 mm x 4 mm (RSA) or in a
16-pin TSSOP (PW) package.
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
APPLICATIONS
鈥?/div>
鈥?/div>
鈥?/div>
All Single Cell Li or Dual Cell Battery or USB
Powered Products as MP-3 Player, PDAs, and
Other Portable Equipment
Dual Input or Dual Output Mode
Simple Li-Ion to 3.3-V Conversion
10
mH
VBAT
Battery
10
mF
SWN
SWP
VOUT
TPS61120
FB
V
out1
100
mF
LBI
OFF
Control
Inputs
OFF
OFF
ON
ON
ON
SKIPEN
EN
LDOEN
PGOOD
LBO
LDOIN
LDOOUT
Control
Outputs
V
out2
2.2
mF
GND
PGND
LDOSENSE
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright 漏 2002鈥?004, Texas Instruments Incorporated
next
TPS61121PWR相關(guān)型號(hào)PDF文件下載
-
型號(hào)
版本
描述
廠商
下載
-
英文版
POWER SCHOTTKY RECTIFIER
-
英文版
UNREGULATED 60-mA CHARGE PUMP VOLTAGE INVERTER
TI
-
英文版
PHOTO TRANSISTOR FOR PHOTO SENSOR
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
FLOPPY DISK DRIVE
Toshiba
-
英文版
Toshiba
-
英文版
PHOTO TRANSISTOR FOR PHOTO INTERRUPLER
Toshiba
-
英文版
PHOTO TRANSISTOR FOR PHOTO INTERRUPLER
Toshiba
-
英文版
Toshiba
-
英文版
Toshiba
-
英文版
OPTO-ELECTRONIC SWITCH HOME ELECTRIC EQUIPMENT OA EQUIPMENT
Toshiba
-
英文版
OPTO-ELECTRONIC SWITCH HOME ELECTRIC EQUIPMENT OA EQUIPMENT
Toshiba
-
英文版
PHOTO TRANSISTOR FOR PHOTO SENSOR PHOTOELECTRIC COUNTER
Toshiba
-
英文版
Toshiba