鈥?/div>
Synchronous (96% Efficient) Boost Converter
With 500-mA Output Current From 1.8-V Input
Available in a 16-Pin QFN 4 x 4 Package
Device Quiescent Current: 20-碌A (Typ)
Input Voltage Range: 1.8-V to 5.5-V
Adjustable Output Voltage Up to 5.5-V Fixed
Output Voltage Options
Power Save Mode for Improved Efficiency at
Low Output Power
Low Battery Comparator
Low EMI-Converter (Integrated Antiringing
Switch)
Load Disconnect During Shutdown
Over-Temperature Protection
DESCRIPTION
The TPS6109x devices provide a power supply
solution for products powered by either a one-cell
Li-Ion or Li-polymer, or a two-cell alkaline, NiCd or
NiMH battery and required supply currents up to or
higher than 1 A. The converter generates a stable
output voltage that is either adjusted by an external
resistor divider or fixed internally on the chip. It
provides high efficient power conversion and is
capable of delivering output currents up to 0.5 A at 5
V at a supply voltage down to 1.8 V. The im-
plemented boost converter is based on a fixed
frequency, pulse-width- modulation (PWM) controller
using a synchronous rectifier to obtain maximum
efficiency. Boost switch and rectifier switch are con-
nected internally to provide the lowest leakage induct-
ance and best EMI behavior possible. The maximum
peak current in the boost switch is limited to a value
of 2500 mA.
The converter can be disabled to minimize battery
drain. During shutdown, the load is completely dis-
connected from the battery. A low-EMI mode is
implemented to reduce ringing and, in effect, lower
radiated electromagnetic energy when the converter
enters the discontinuous conduction mode.
The output voltage can be programmed by an exter-
nal resistor divider or is fixed internally on the chip.
The device is packaged in a 16-pin QFN 4 x 4 mm
(16 RSA) package.
L1
6.8
碌H
SW
VBAT
VOUT
R3
FB
R4
R5
C2
2.2
碌F
C3
100
碌F
e.g. 5 V up to
500 mA
APPLICATIONS
All Single Cell Li or Dual Cell Battery, or USB
Powered Operated Products as MP-3 Player,
PDAs, and Other Portable Equipment
1.8 V to 5 V
C1
Input 10
碌F
R1
EN
LBI
R2
SYNC
GND
LBO
PGND
TPS6109x
Low Battery
Output
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright 漏 2003鈥?004, Texas Instruments Incorporated