TDA9109A
LOW-COST I
2
C CONTROLLED DEFLECTION PROCESSOR
FOR MULTISYNC MONITOR
FEATURES
General
s
SYNC PROCESSOR
s
12V SUPPLY VOLTAGE
s
8V REFERENCE VOLTAGE
s
HORIZONTAL LOCK/UNLOCK OUTPUT
2
s
READ/WRITE I C INTERFACE
s
VERTICAL MOIRE
s
B+ REGULATOR
- Internal PWM generator for B+ current mode
step-up converter
- Switchable to step-down converter
- I
2
C adjustable B+ reference voltage
- Output Pulses Synchronized on Horizontal
Frequency
- Internal Maximum Current Limitation
Horizontal
s
Self-adaptative
s
Dual PLL concept
s
150kHz maximum frequency
s
X-ray protection input
2
s
I C controls:
Horizontal duty-cycle, H-position
Vertical
s
Vertical ramp generator
s
50 to 185Hz AGC loop
s
Geometry tracking with Vpos & Vamp
2
s
I C controls:
Vamp, Vpos, S-corr, C-corr
s
DC breathing compensation
I
2
C Geometry corrections
s
Vertical parabola generator
(Pin Cushion - E/W, Keystone, Corner
Correction)
s
Horizontal dynamic phase
(Side Pin Balance & Parallelogram)
s
Horizontal
and vertical dynamic focus
(Horizontal focus amplitude, Horizontal focus
symmetry, Vertical focus amplitude)
Version 4.2
June 2000
1/47
DESCRIPTION
The TDA9109A is a monolithic integrated circuit
assembled in a 32-pin shrink dual in line plastic
package. This IC controls all the functions related
to the horizontal and vertical deflection in multi-
mode or multi-frequency computer display moni-
tors.
The internal sync processor, combined with the
very powerful geometry correction block, make
the TDA9109A suitable for very high performance
monitors, using very few external components.
The horizontal jitter level is very low. It is particu-
larly well-suited to high-end 15鈥?and 17鈥?monitors.
Combined with the ST7275 Microcontroller family,
TDA9206 (Video preamplifier) and STV942x (On-
Screen Display controller), the TDA9109A allows
fully I
2
C bus-controlled computer display monitors
to be built with a reduced number of external com-
ponents
.
SHRINK32
(Plastic Package)
ORDER CODE:
TDA9109A
1