High Power GaAs SPDT Switch
DC - 3 GHz
Features
q
SW-106, SW-276
V 2.00
SW-106 (CR-5)
q
q
q
q
+39 dBm Typ. 1 dB Compression Point,
-8V Control
+65 dBm Typ. 3rd Order Intercept, -8V Control
Insertion Loss of 0.4 dB Typical
Low Power Consumption
Fast Switching Speed
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
(鈥?5擄C to +85擄C)
SW-106
SW-276
0.5 dB
0.6 dB
0.8 dB
1.2 dB
34 dB
32 dB
20 dB
15 dB
1.3:1
1.5:1
1.5:1
1.6:1
0.4 dB Max
0.5 dB Max
0.7 dB Max
1.0 dB Max
37 dB Min
31 dB Min
24 dB Min
19 dB Min
1.3:1 Max
1.5:1 Max
1.5:1 Max
1.6:1 Max
Guaranteed Specifications
1
Frequency Range
Insertion Loss
Isolation
VSWR
Operating Characteristics
2
Impedance
Switching Characteristics
Trise, Tfall (10% to 90% )
Ton, Toff (50% CTL to 90%/10% RF)
Transients (In-Band)
Input Power for Compression
0.9 GHz
(-5VControl)
0.9 GHz
(-8V Control)
0.1 dB
+32.5 dBm
+35.5 dBm
50 Ohms Nominal
30 ns Typ
35 ns Typ
12 mV Typ
1.0 dB
+35.5 dBm
+39.5 dBm
Typ
Typ
SW-276 (CR-2)
Third Order Intercept Point (with two +10 dBm Input Tones)
0.9 GHz
(-5V Control)
+61 dBm Typ
0.9 GHz
(-8V Control)
+65 dBm Typ
Control Voltages
Vin Low
Vin High
0 to -0.2V @ 20 碌A Max
-5V @ 50 碌A Typ to -10V @ 800 碌A Max
1. All specifications apply when operated with bias voltages of 0V for Vin Low
and -5 to -10V for Vin High, and 50 ohm impedance at all RFports, unless
otherwise specified.
2. High power (greater than 1W) handling specifications apply to cold switching
only. For input powers under 1W hot switching can be used.
3. Contact the factory for standard or custom screening requirements.
Ordering Information
Part Number
SW-106 PIN
SW-276 PIN
Package
Surface Mount
Ceramic
For both switches:
Unless Otherwise Noted:
Bottom of Case is AC Ground
Dimension in ( ) are in mm.
.xxx = 鹵 0.010 (.xx = 鹵 0.25)
.xx = 鹵 0.02 (.x = 鹵 0.5)
1
2
3
