ST485A
VERY HIGH SPEED
LOW POWER RS-485/RS-422 TRANSCEIVER
s
s
s
s
s
s
s
s
s
s
LOW SUPPLY CURRENT: 5mA MAX
HIGH DATA RATE > 30Mbps
DESIGNED FOR RS 485 INTERFACE
APPLICATIONS
-7 TO 12 COMMON MODE INPUT VOLTAGE
RANGE
DRIVER MANTAINS HIGH IMPEDANCE IN
3-STATE OR WITH THE POWER OFF
70mV TYPICAL INPUT HYSTERESIS
OPERATE FROM SINGLE 5 SUPPLY
鹵4kV ESD PROTECTION
CURRENT LIMITING AND THERMAL
SHUTDOWN FOR DRIVER OVERLOAD
PROTECTION
LATCH-UP FREE UP TO 500mA
DIP
SOP
DESCRIPTION
The ST485A is a low power, high speed
transceiver
for
RS-485
and
RS-422
communications. The device contains one driver
and one receiver in half duplex configuration. The
ST485A draws 3mA (typ.) of supply current when
ORDERING CODES
Type
ST485ACN
ST485ABN
ST485ACD
ST485ABD
ST485ACDR
ST485ABDR
Temperature
Range
0 to 70 擄C
-40 to 85 擄C
0 to 70 擄C
-40 to 85 擄C
0 to 70 擄C
-40 to 85 擄C
Package
unloaded or fully loaded with disabled drivers. It
operates from a single 5V supply.
Driver is short-circuit current limited and is
protected against excessive power dissipation by
thermal shutdown circuitry that place the driver
outputs into a high-impedance state. The receiver
input has a fail-safe feature that guarantees a
logic high output if both inputs are open circuit.
The ST485A is designed for bi-directional data
communications or multipoint bus transmission
lines.
Comments
50parts per tube / 40tube per box
50parts per tube / 40tube per box
100parts per tube / 20tube per box
100parts per tube / 20tube per box
2500 parts per reel
2500 parts per reel
DIP-8
DIP-8
SO-8 (Tube)
SO-8 (Tube)
SO-8 (Tape & Reel)
SO-8 (Tape & Reel)
November 2002
1/13