鈻?/div>
90 Mbps (max) data rate when driven by a
totem pole driver
8 Mbps (max) data rate when driven by an
open drain pole driver
Bidirectional level translation without
direction control pin
Wide V
L
voltage range of 1.65 to 3.6 V
Wide V
CC
voltage range of 1.80 to 5.5 V
Power down mode feature 鈥?when either
supply is off, all I/Os are in high impedance
Low quiescent current (max 12 碌A)
Able to be driven by totem pole and open drain
drivers
5.5 V tolerant enable pin
ESD performance on all pins: 鹵2 kV HBM
Small package and footprint
QFN10L (1.8 x 1.4 mm) package
QFN10L (1.8 x 1.4 mm)
Description
The ST2329 is a 2-bit dual supply level translator
which provides the level shifting capability to allow
data transfer in a multi-voltage system. Externally
applied voltages, V
CC
and V
L
, set the logic levels
on either side of the device. It utilizes
transmission gate-based design that allows
bidirectional level translation without a control pin.
The ST2329 accepts a V
L
from 1.65 to 3.6 V and
V
CC
from 1.80 to 5.5 V, making it ideal for data
transfer between low-voltage ASICs/PLD and
higher voltage systems. This device has a tri-state
output mode which can be used to disable all
I/Os.
The ST2329 supports power down mode when
V
CC
is grounded/floating and the device is
disabled via the OE pin.
Applications
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
Low voltage system level translation
Mobile phones and other mobile devices
I
2
C level translation
UART level translation
Table 1.
Device summary
Order code
ST2329QTR
Package
QFN10L (1.8 x 1.4 mm)
Packaging
Tape and reel (3000 parts per reel)
May 2008
Rev 4
1/21
www.st.com
21
next