Installation Instructions for the
1557-
MICRO SWITCH SS100 Series Surface Mount
Hall Effect Sensors
GENERAL INFORMATION
SS100 Series Hall effect sensors have an NPN
(current sinking) output. The small SOT89 style
package surface mounts on PC boards and flexible
circuits.
PK 88830
These products are
NOT
suitable for protection
against personal injury.
To
AVOID
personal injury or death,
DO NOT
USE
these products as emergency stop or safety
devices, or in any other application where human
safety is at risk.
SOLDERING INSTRUCTIONS
Exposure to high temperatures should be kept at
a minimum.
MICRO SWITCH recommends a convection
infrared reflow process with peak temperatures not
to exceed 220擄C (428擄F) for 20 seconds maximum.
DO NOT wave solder this product.
Performance
and reliability may be negatively affected. Sub-
jecting these products to wave soldering will void
MICRO SWITCH鈥檚 warranty.
CLEANING
Use agitated rinse.
Do not use pressure wash.
High pressure stream could force contaminants into
sensor package.
SS100 Series sensors are Category 2 ESD
sensitive per DOD-STD-1686A. Perform
assembly operations on tables with conductive
tops, with operators grounded.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage
Voltage externally
applied to output
Output ON current
Temperature
Operating
Storage
Magnetic Flux
-1 to +30 VDC
+30 VDC max. (OFF condition only)
-0.5 VDC min. (OFF or ON condition)
50 mA max.
-40 to +150擄C (-40 to +302擄F)
-55 to +150擄C (-67 to +302擄F)
No limit. Circuit cannot be damaged by magnetic
overdrive.
Absolute maximum ratings are
the extreme limits that the
device will withstand without
damage to the device. However,
the electrical and mechanical
characteristics are not
guaranteed as the maximum
limits (above recommended
operating conditions) are
approached, nor will the device
necessarily operate at absolute
maximum ratings.
OPERATING CHARACTERISTICS
Supply Voltage
Current Consumption
Output Voltage (operated)
Output Current (operated)
Output Leakage Current (released
Output Switching Time
Rise, 10 to 90%
Fall, 90 to 10%
Operating Temperature Range
Min.
3.8
錚?/div>
錚?/div>
錚?/div>
錚?/div>
錚?/div>
錚?/div>
-40擄C
Typ.
錚?/div>
錚?/div>
0.15
錚?/div>
錚?/div>
.05
碌s
.15
碌s
錚?/div>
Max.
30
10
0.40
20 mA
10
碌A(chǔ)
1.5
碌s
1.5
碌s
+125擄C
Remarks
VDC
mA
Sinking 20 mA max.
V
CC
= 12 V,
R
L
= 1.6 K
鈩?
C
L
= 20 pF
MICRO SWITCH Sensing and Control
SS166A相關(guān)型號PDF文件下載
-
型號
版本
描述
廠商
下載
-
英文版
Surface Mount Schottky Power Rectifier
ONSEMI
-
英文版
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
TRSYS
-
英文版
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 to 100...
-
英文版
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
SSE
-
英文版
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER R...
DCCOM
-
英文版
1.0 AMP. SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS
JGD
-
英文版
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PANJIT
-
英文版
1A SCHOTTKY SMA DIODES
LRC
-
英文版
1 Amp Schottky Rectifier 20 to 100 Volts
-
英文版
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
-
英文版
1.0 Ampere Schottky Barrier Rectifiers
FAIRCHILD
-
英文版
Unit
SS12 - SS110
SURFACE MOUNT SCHOTTKY BARRIER DIODES
...
-
英文版
Diode Schottky 60V 1A Surface Mount SMA (DO-214AC)
-
英文版
-
英文版
山東迪一電子科...
-
英文版
山東迪一電子科...
-
英文版
迪一電子
-
英文版
MDD
-
英文版
Schottky Barrier Rectifier
Guard Ring Protection
Low Forwa...
金譽
-
英文版
1.0 Ampere Schottky Barrier Rectifiers
FAIRCHILD ...
1
2
3
4
