R
ADIO
F
REQUENCY
I
DENTIFICATION
S
YSTEMS
Tag-it HF-I Transponder Inlay
- Rectangle-Large -
The Tag-it HF-I Transponder Inlay is compliant
with the ISO/IEC 15693 standard. With a user
memory of 2k bits, organized in 64 blocks, the
Tag-it HF-I Transponder Inlays allows advanced
solutions for a variety of applications, including
product authentication, ticketing, library manage-
ment, supply chain management etc. The thin
and flexible Tag-it HF-I Transponder Inlays can
be easily converted into paper or plastic labels.
盲
Specifications:
Part Number
Supported Standard
Recommended Operating frequency
Passive Resonance Frequency (at +25擄C)
RI-I02-112A
ISO 15693-2,-3
13.56 MHz
13.86 MHz
鹵
200kHz (includes
frequency offset to compensate
further integration into paper)
94 dB碌A(chǔ)/m
97 dB碌A(chǔ)/m
64 bits
2k bits organized in 64 x 32-bit blocks
100,000
> 10 years
#
#
RI-I02-112B
14.4 MHz
鹵
200kHz (includes
frequency offset to compensate
PVC lamination)
94 dB碌A(chǔ)/m *
97 dB碌A(chǔ)/m *
Typ. required activation field strength read (at +25擄C)
Typ. required activation field strength write (at +25擄C)
Factory programmed Read Only Number
Memory (user programmable)
Typical programming cycles (at +25擄C)
Data retention time (at +55擄C)
Simultaneous Identification of Tags
Antenna size
Foil width
Foil pitch
Thickness
Base material
Smallest bending radius allowed
Operating temperature
Storage temperature (single inlay)
Storage temperature (on reel)
Delivery
Up to 50 tags per second (reader/antenna dependent)
45 mm x 76 mm (鈭?.77 in x
鈭?.99
in)
48 mm
鹵
0.5 mm (1.89 in
鹵
0.02 in)
96 mm +0.1mm/-0.4mm (鈭?.78 in)
Chip: 0.355mm (鈭?.014 in)
Antenna: 0.085mm (鈭?.0033 in)
Substrate: PET (Polyethylenetherephtalate)
Antenna: Aluminum
18 mm (鈭?.71 in)
-25擄C to +70擄C
-40擄C to +85擄C (warpage may occur at upper temperature range)
-40擄C to +40擄C
Single row tape wound on cardboard reel with 500 mm diameter
Reel outer width: approx. 60 mm (鈭?.36 in)
Reel inner width: approx. 50 mm (鈭?.97 in)
Hub diameter: 76.2 mm (3 in)
5,000
Typical quantity of good units per reel
Note: For highest possible read-out coverage we recommend to operate readers at a modulation depth of 20% or higher
#
After integration into paper; * After PVC Lamination
For more information, contact the sales office or distributor nearest you. This contact information can be found
on our web site at:
http://www.ti-rfid.com
1
2
