鈥?/div>
Maximum Current Consumption 10 碌A(chǔ)
Description
RE031 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output
voltage, rated for loads up to 5 mA. It is designed to be integrated with other analog
cells, digital logic, microcontrollers, DSP cores and memory blocks into system-on-
chip products.
The circuit consists of a PMOS pass device, an error amplifier and a feedback resis-
tive network, sized to achieve the required closed loop gain. These blocks make up
the regulating loop. An internal reference voltage (bandgap voltage) has been
included. The target reference voltage is 1.2V, with a tolerance of 4%, delivered by an
external trimming code. Current reference is generated inside the cell through a circuit
supplied by V
BAT
. The remote sense terminal, V
SAUVS
, provides regulation at the load,
by connecting it together with the output terminal, V
SAUV
,, near a critical point to
improve the regulation performance (e.g., connecting them at the package pin by dou-
ble bonding thus avoiding the bonding resistance influence). A capacitor of 2.2 碌F
connected from V
SAUV
to ground is needed as external compensation.
Figure 1.
Symbol
(1)
Embedded ASIC
Macrocell:
Power
Management for
Mobile
Terminals (PM)
RE031
Fixed 2.5V
5 mA
Low Quiescent
Current
LDO Voltage
Regulator
trimbg20[9:0]
vbat2a
BG020
rst
vsauv
vbg20
vsauvs
vsauvc
gnd2
Note:
1. Pin names are written as they appear on the user screen when the symbol is
opened in the design tool environment.
Rev. 2707B鈥揚(yáng)MGMT鈥?3/03
1