鈥?/div>
Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS:
PSMPD65 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 鈥?264VAC (127 鈥?370VDC)
Input Frequency
47 to 440Hz
AC Current (typical)
1.6A @ 115VAC / 1A @ 230VAC
Inrush Current
20A @ 115VAC cold start / 40A @ 230VAC cold start.
Leakage Current
Less than 0.3mA @ 264VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Voltage Tolerance
鹵4.0% (CH.1) and 鹵7.0% (CH.2)
Output Adjustment Range
CH1: 鹵10% rated output voltage.
Output Power (max)
72 Watts with 18CFM min. forced air.
Line Regulation
鹵1% (CH.1) and 鹵2% (CH.2)
Load Regulation
鹵3% (CH.1) and 鹵4% (CH.2)
Output Current
See Table
Ripple & Noise (20MHz BW)
See Table
Setup, Rise Time
800ms and 20ms at full load and 230VAC.
Hold-Up Time
80ms at full load and 230VAC.
Temperature Coefficient
鹵0.04%/擄C (0~50擄C) on +5V output.
PROTECTION
Over Voltage Protection
CH.1 115~135% rated output voltage.
Overload Protection
73~105W hiccup mode, auto-recovery.
GENERAL SPECIFICATIONS
Switching Frequency (fixed)
45KHz
Efficiency
PSMPD-65A: 75% PSMPD-65B: 78%
Isolation Voltage (input to output)
4000VAC for 1 min.
Isolation Voltage (input to field ground)
1500VAC for 1min.
Isolation Resistance
100M/500VDC ohms
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10擄C to +55擄C (refer to derating curve)
Storage Temperature
-20擄C to +85擄C (10%~95% RH)
Humidity (non-condensing)
20% to 90% RH
Vibration
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.
MTBF
291,300 hours min.
MIL-HDBK-217 (25擄C)
PHYSICAL SPECIFICATIONS
Weight
280g
Dimensions
127(L) x 76(W) x 42(H) mm
SAFETY & EMC
Agency Approvals
UL/ CUL/ TUV/ CB/ CE
Safety Standards
UL2601-1, TUV EN60601-1, IEC601-1 Approved
EMC Standards
EN55011 class B, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2,3, EN60601-1-2, ENV50204
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797