28 pin PIC Panic Module
Farnell Order Code 112-203
Have you ever been in a panic to produce something in a hurry?
Have you prototyped a PIC project and wanted to box it up to give a professional
looking unit?
Look no further. Two ready assembled modules have been developed
to enable prototyping with either 18 or 28 pin 16Cxx PIC鈥檚 and then
simply replace the cover and mount accordingly.
The modules comprise a socket for the PIC with all the I/O brought
out, a small proto-block, a 78L05 regulator and a 4MHz resonator
(socketed).
With the addition of a COMMS module, remote data transfer is possible on either
RS232 (2xTX, 2xRX pins) or RS485 (with terminating resistor). The modules plug
directly into the proto-board and are fitted with screw connectors for external cable
connections.
Use with a PICSTART Plus Programmer and the PIC of your choice.
Specification
Supply Voltage
Internal Voltage
Supply Current
Resonator
Program PIC as
7 to 25 Volts
5 Volts
100mA (Max)
4MHz (supplied)
XT for 4MHz -
HS for higher frequencies
Notes
This module is not suitable for the PIC16C5xx series, which have a different pinout. As the
construction and software is out of our control, it is up to the user to ensure the product meets
EMC regulations
Order as
PANIC18
PANIC28
COMM232
COMM485
113-578
112-203
118-072
118-084
Bluebird Electronics
Suite 2, Townsend Barn
Poulshot, Devizes. SN10 1SD
Tel +44 (0) 1380 827080 Fax +44 (0) 1380 827082
internet www.bluebird-electronics.co.uk email info@bluebird-electronics.co.uk
1
