鈥?/div>
Hermetically sealed LED and
photosensor
Absolute Maximum Ratings
(T
A
= 25
o
C unless otherwise noted)
Input-to-Output Iso lation Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
鹵50
kV
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40擄C to +85擄C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40擄C to +85擄C
Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 sec. with soldering
iron). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260擄C
Input Diode
Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V
Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW
Output Phototransistor
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 7.0 V
Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 18.0 V
Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Open Collector Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mW
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow
soldering.
(2) Derate lin early mW/擄 above 25擄C.
C
(3) Measured with input and output leads shorted and rela tive humidity of less than 50%.
This device is susceptible to damage from electrostatic discharge (ESD). Normal static
precautions should be taken in the handling of this device to prevent ESD damage.
Description
The OPI155 contains a high speed
monolithic photo-IC comprised of a
photodiode and DC amplifier driving an
open collector output Schottky transistor.
It is optically coupled by means of an
internal light pipe and mounted in a high
dielectric plastic housing. The LED and
sensor are in hermetically sealed
packages. It is designed for applications
requiring high speed and high voltage
isolation between input and output.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
13
(972) 323-2200
Fax (972) 323-2396
1
2
