鈥?/div>
TO-18 equivalent package style
Description
The OP993 photodiode consists of a PIN
silicon photodiode mounted in a dark
blue plastic injection molded shell
package. The wide receiving angle
provides excellent on-axis coupling. The
sensors are 100% production tested for
close correlation with Optek emitters.
Optek鈥?packaging process provides
s
excellent optical and mechanical axis
alignment. The shell also provides
excellent optical lens surface, control of
chip placement, and consistency of
external package dimensions.
Absolute Maximum Ratings
(T
A
= 25
o
C unless otherwise noted)
Reverse Breakdown Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40
o
C to +100
o
C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
o
C
(1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
(2)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
Max. 20 grams force may be applied to leads when soldering.
(2) Derate linearly 1.67 mW/
o
C above 25
o
C.
(3) Light source is an unfiltered GaAlAs emitting diode operating at peak emission wavelength of
890nm and E
e(APT)
of 1.7 mW/cm
2
average within a .250" dia. aperture.
(4) This dimension is held to within
鹵
0.005" on the flange edge and may vary up to
鹵
0.020" in
the area of the leads.
Typical Performance Curves
Relative Response vs.
Wavelength
Coupling Characteristics
OP993 and OP293
V
R
= 5 V
I
F
= 20 mA
位
- Wavelength - nm
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
3-64
Distance Between Lens tips - inches
(972) 323-2200
Fax (972) 323-2396
1
2
