鈥?/div>
Wavelength matched to silicon鈥?peak
Absolute Maximum Ratings
(T
A
= 25
o
C unless otherwise noted)
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (2
碌s
pulse width, 0.1% duty cycle). . . . . . . . . . . . . . . . . . 1.0 A
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40擄C to +100擄C
Lead Soldering Temperature [1/16 inch (1.6mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260擄C
(1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
(2)
NOTES:
(1) RMA flux is recommended. Duration can be ex tended to 10 seconds maximum when flow
soldering. A maximum of 20 grams force may be applied to the leads when soldering.
(2) Derate linearly 1.33 mW/擄 above 25擄
C
.
(3) E
e(APT)
is a measurement of the average apertured radiant in cidence upon a sensing area
0.180鈥?4.57 mm) in diameter, perpendicular to and centered on the mechanical axis of the
lens, and 0.653鈥?16.6 mm) from the measurement surface. E
e(APT)
is not necessarily
uniform within the measured area.
response
鈥?/div>
Fast switching speed
鈥?/div>
Side-looking package for space limited
applications
Description
The OP245PS is an 850 nm, infrared
emItting diode molded in IR transmissive
amber-tinted epoxy packages. The
side-looking package is for use in PC
board mounted slotted switches or as
easily mounted interrupt detectors.
The stable V
F
vs. Temperature
characteristic make them ideal for
applications where voltage is limited
(such as battery operation).
The low t
r
/t
f
make them ideal for high
speed operations.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
7
(972) 323-2200
Fax (972) 323-2396
1
2
