鈥?/div>
True single chip FSK/ASK transmitter in
a small 8-pin package
Adjustable output power up to +10dBm
FSK data rate up to 50kbits/s
Very few external components
On-chip frequency synthesiser gives
improved frequency stability compared to
SAW solutions
Wide power supply range: 2.4 to 3.6 V
Low supply current, typical 9mA
@ -10dBm output power
Power Down and Clock modes makes
power saving easy
Reference Clock output pin for
microcontroller
Automatic Meter Reading
Keyless entry
Wireless data communication
Alarm and security systems
Home Automation
Remote control
Surveillance
Automotive
Telemetry
Toys
GENERAL DESCRIPTION
nRF902 is a single-chip transmitter for the 868 MHz ISM band, designed to comply
with the ETSI specification I-ETS 300 220. Using nRF902 both FSK and ASK
modulation is possible. The transmitter consists of a fully integrated frequency
synthesiser, a power amplifier, a crystal oscillator and a modulator. Few external
components are required: a 13.567 MHz crystal, two resistors and some decoupling
capacitors. Due to the use of the crystal-oscillator stabilised frequency synthesiser,
frequency drift is much lower than in comparable SAW-resonator based solutions.
Output power is easily programmable by use of an external resistor. Current
consumption is very low, only 9 mA at an output power of 鈥?0dBm. Built-in Clock
and Power Down modes makes power saving and duty-cycling easily realisable.
QUICK REFERENCE DATA
Parameter
Minimum supply voltage
Maximum output power
Maximum FSK data rate
Maximum ASK data rate
Supply current FSK transmitter @ -10dBm output power
Supply current in Clock mode
Supply current in Power Down mode
Value
2.4
10
50
10
9
200
<10
Unit
V
dBm
kbit/s
kbit/s
mA
碌A(chǔ)
n螒
Table 1. nRF902 quick reference data
Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway
Revision: 1.0
Page 1 of 13
-
Phone +4772898900
-
Fax +4772898989
April 2000