NJU6631A
PRELIMINARY
16-CHARACTER 1-LINE DOT MATRIX
LCD CONTROLLER DRIVER
s
GENERAL DESCRIPTION
The
NJU6631A
is a 1 Chip Dot Matrix LCD controller
driver for up to 16-character 1-line or 8-character 2-line
display.
It contains microprocessor interface circuits,
instruction decoder controller, character generator
ROM/RAM and common and segment drivers.
The bleeder resistance generates for LCD Bias
voltage internally.
The CR oscillator incorporates C and R, therefore no
external components for oscillation are required.
The microprocessor interface circuits which operate
2MHz frequency, can be connected directly to 4bit/8bit
microprocessor.
The character generator consists of 9,600 bits ROM
and 32 x 5 bits RAM. The standard version ROM is
coded with 192 characters including capital and small
letter fonts.
The 16-common and 40-segment drives up to 16-
character 1-line LCD panels which divided two common
electrode blocks.
The rectangle outlook is very applicable to COG or
Slim TCP.
s
PACKAGE OUTLINE
NJU6631ACH
s
FEATURES
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
16-character 1-line Dot Matrix LCD Controller Driver
4/8 Bit Microprocessor Direct Interface
Display Data RAM
- 16 x 8 bits : Maximum 16-character 1-line Display
Character Generator ROM - 9,600 bits : 240 Characters for 5 x 8 Dots
Character Generator RAM - 32 x 5 bits : 4 Patterns(5 x 8 Dots)
Microprocessor can access to Display Data RAM and Character Generator RAM
High Voltage LCD Driver
: 16-common / 40-segment
Duty Ratio
: 1/16 Duty
Number of Maximum Display Characters : 16-character
Useful Instruction Set
Clear Display, Return Home, Display ON/OFF Cont, Cursor ON/OFF Cont, Display Blink,
Cursor Shift, Character Shift,
Common and Segment driver Location order Select Function(Pin configuration mode A / mode B)
Power On Initialize / Hardware Reset Function
Bleeder Resistance On-chip
Oscillation Circuit On-chip
Low Power Consumption
Operating Voltage --- +5V
Package Outline
--- Bumped Chip
C-MOS Technology
31.Mar,2000
Ver.1