60W Open Frame Single Output
NAD-600X series
Feature:
l
l
l
l
l
l
90 to 264Vac universal input range.
UL/CUL, TUV, CB safety meet(approval).
EMI/RFI meet VDE & FCC limit B.
Low cost & compact size.
60Watts in127脳76.2脳44.1mm Size.
2 Year Warranty.
Specifications:
typical at nominal line, full load at 25
擄
C.
Input Specifications:
General Specifications:
Input voltage:
90 to 264Vac
Input Frequency:
47 Hz to 63Hz
Input inrush current:
20A at 115Vac
40A at 230Vac
Earth leakage:
0.2mA max @ 115Vac
0.4mA max @ 230Vac
Efficiency:
75% typical at full load
Hold-up time:
15ms @ 115Vac full load
EMI/RFI:
VDE & FCC Class B limits
Dielectric Withstand:
Input/output: 3000Vac
Input/Ground: 1500Vac
盧Safety
Meet(Approval):
UL/CUL UL60950
TUV EN60950
CB IEC950
Switching frequency:
20kHz(reference)
Weight:
350g
MTBF:
100,000hours(MIL-HDBK-217F)
Output Specifications:
Output Rating:
See Selection table
Output Voltage Accuracy :
鹵
5% max.
Line Regulation:
鹵
1% max.
Load Regulation:
鹵
1% max.
(Full to half load)
Transient Response
鹵
1% max.dev.
(Full to half load) 500uS recovery
Temperature Coefficient:
鹵
0.04% /
擄C
Ripple & Noise:
1% P-P max.
Environmental Specifications:
Operating temperature:
0 to +50擄C
Storage temperature:
-20 to +85擄C
Humidity:
5 to 95 % RH non-condensing
Protections:
b. Over voltage protection
Vibration:
2.4G , 5 to 500Hz
c. Over power protection
Cooling:
Free air convection
d. Short circuit protection
Note:
1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis.
2. Maximum output power is 60W.
3. At least 20% of load is required to obtain stable regulation.
4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap
& a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope
directly.
盧
Please refer the safety approval status on appendix 1, For latest safety approval status
Please consult YCL or visit"
www.ycl.com.tw"
Date: Sep 19,2003
13
1
2
