鈥?/div>
GENERAL DESCRIPTION
The MX29F040 is a 4-mega bit Flash memory organized
as 512K bytes of 8 bits. MXIC's Flash memories offer the
most cost-effective and reliable read/write non-volatile
random access memory. The MX29F040 is packaged
in 32-pin PLCC, TSOP, PDIP. It is designed to be
reprogrammed and erased in system or in standard
EPROM programmers.
The standard MX29F040 offers access time as fast as
55ns, allowing operation of high-speed microprocessors
without wait states. To eliminate bus contention, the
MX29F040 has separate chip enable (CE) and output
enable (OE ) controls.
MXIC's Flash memories augment EPROM functionality
with in-circuit electrical erasure and programming. The
MX29F040 uses a command register to manage this
functionality. The command register allows for 100%
TTL level control inputs and fixed power supply levels
during erase and programming, while maintaining
maximum EPROM compatibility.
MXIC Flash technology reliably stores memory
contents even after 100,000 erase and program
cycles. The MXIC cell is designed to optimize the
erase and program mechanisms. In addition, the
combination of advanced tunnel oxide processing
and low internal electric fields for erase and
programming operations produces reliable cycling.
The MX29F040 uses a 5.0V鹵10% VCC supply to
perform the High Reliability Erase and auto
Program/Erase algorithms.
The highest degree of latch-up protection is
achieved with MXIC's proprietary non-epi process.
Latch-up protection is proved for stresses up to
100 milliamps on address and data pin from -1V to
VCC + 1V.
P/N:PM0538
REV. 1.6, AUG. 08, 2001
1