鈭?/div>
0 3.6V (3.3V nominal)
240mW (nominal);
250uW (standby)
0擄C to +60擄C
48-pin PLCC
PARAMETER
Optical Format
Active Imager Size
Active Pixels
Pixel Size
Color Filter Array
Shutter Type
Maximum Data Rate/
Master Clock
QXGA
Frame (2,048 x 1,536)
Rate
UXGA
(1,600 x 1,200)
SXGA
(1,280 x 1,024)
XGA
(1,024 x 768)
VGA (640 x 480)
ADC Resolution
Responsivity
Dynamic Range
SNR
MAX
Supply Voltage
Power Consumption
Operating Temperature
Packaging
Applications
鈥?Digital still cameras
鈥?Digital video cameras
鈥?Converged DSCs/camcorders
Description
The Micron
廬
Imaging MT9T001 is a QXGA-format
1/2-inch CMOS active-pixel digital image sensor with
an active imaging pixel array of 2,048H x 1,536V. It
incorporates sophisticated camera functions on-chip
such as windowing, column and row skip mode, and
snapshot mode. It is programmable through a simple
two-wire serial interface.
The 3-megapixel CMOS image sensor features Digi-
talClarity鈥擬icron鈥檚 breakthrough low-noise CMOS
imaging technology that achieves CCD image quality
(based on signal-to-noise ratio and low-light sensitiv-
ity) while maintaining the inherent size, cost, and inte-
gration advantages of CMOS.
The sensor can be operated in its default mode or
programmed by the user for frame size, exposure, gain
setting, and other parameters. The default mode out-
puts a QXGA image at 12 frames per second (fps). An
on-chip analog-to-digital converter (ADC) provides 10
bits per pixel. FRAME_VALID and LINE_VALID signals
are output on dedicated pins, along with a pixel clock
that is synchronous with valid data.
Our MT9T001 produces extraordinarily clear, sharp
digital pictures, and its ability to capture both continu-
ous video and single frames makes it the perfect choice
for a wide range of consumer and industrial applica-
tions, including digital still cameras, digital video cam-
eras, and PC cameras.
09005aef80c64010
MT9T001_3100_DS_1.fm - Rev. C 9/04 EN
1
漏2003 Micron Technology, Inc. All rights reserved.
鈥?/div>
PRODUCTS
AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE SUBJECT TO CHANGE BY
MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON鈥橲 PRODUCTION DATA SHEET SPECIFICATIONS.
next