鈾?/div>
Real-Time Current and Power Monitoring
鹵1.5% (max) Current-Sense Accuracy
鹵1.5% (max) Power-Sense Accuracy
Two Uncommitted Comparators (MAX4211)
1.21V Reference Output (MAX4211)
Three Current/Power Gain Options
100mV/150mV Current-Sense Full-Scale Voltage
+4V to +28V Input Source Voltage Range
+2.7V to +5.5V Power-Supply Voltage Range
Low Supply Current: 380碌A(chǔ) (MAX4210)
220kHz Bandwidth
Small 6-Pin TDFN and 8-Pin 碌MAX Packages
(MAX4210)
MAX4210/MAX4211
The MAX4210/MAX4211 low-cost, low-power, high-side
power/current monitors provide an analog output volt-
age proportional to the power consumed by a load by
multiplying load current and source voltage. The
MAX4210/MAX4211 measure load current by using a
high-side current-sense amplifier, making them espe-
cially useful in battery-powered systems by not interfer-
ing with the ground path of the load.
The MAX4210 is a small, simple 6-pin power monitor
intended for limited board space applications. The
MAX4210A/B/C integrate an internal 25:1 resistor-divider
network to reduce component count. The MAX4210D/E/F
use an external resistor-divider network for greater design
flexibility.
The MAX4211 is a full-featured current and power mon-
itor. The device combines a high-side current-sense
amplifier, 1.21V bandgap reference, and two compara-
tors with open-drain outputs to make detector circuits
for overpower, overcurrent, and/or overvoltage condi-
tions. The open-drain outputs can be connected to
potentials as high as 28V, suitable for driving high-side
switches for circuit-breaker applications.
Both the MAX4210/MAX4211 feature three different cur-
rent-sense amplifier gain options: 16.67V/V, 25.00V/V, and
40.96V/V. The MAX4210 is available in 3mm x 3mm, 6-pin
TDFN and 8-pin 碌MAX
廬
packages and the MAX4211 is
available in 4mm x 4mm, 16-pin thin QFN and 16-pin
TSSOP packages. Both parts are specified for the -40擄C
to +85擄C extended operating temperature range.
Ordering Information
PART
MAX4210AETT
MAX4210AEUA
TEMP RANGE
-40擄C to +85擄C
PIN-PACKAGE
6 TDFN-EP*
(3mm x 3mm)
TOP
MARK
AHF
鈥?/div>
-40擄C to +85擄C 8 碌MAX
*EP
= Exposed paddle.
Ordering Information continued at end of data sheet.
Functional Diagrams
+
V
SENSE
R
SENSE
LOAD
RS+
V
CC
2.7V TO
5.5V
RS-
-
Applications
Overpower Circuit Breakers
Smart Battery Packs/Chargers
Smart Peripheral Control
Short-Circuit Protection
Power-Supply Displays
Measurement Instrumentation
Baseband Analog Multipliers
VGA Circuits
Power-Level Detectors
4V TO
28V
+
-
+
-
25:1
IOUT
POUT
1.21V
REFERENCE
INHIBIT
REF
CIN1+
COUT1
CIN1-
LE
CIN2+
COUT2
碌MAX is a registered trademark of Maxim Integrated Products, Inc.
Pin Configurations and Selector Guide appear at end of data
sheet.
MAX4211A
MAX4211B
MAX4211C
GND
CIN2-
Functional Diagrams continued at end of data sheet.
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim鈥檚 website at www.maxim-ic.com.
next