75k鈩?/div>
鹵1%
resistor (0805)
Not installed (0805)
200mA, 75V junction diode (SOT-23)
Central Semiconductor CMPD4448
0.5A, 30V Schottky diode (SOD-123)
Nihon EP05Q03L
10碌H, 1A inductors
Sumida CR43-100MC
MAX1817EUB (10-pin
碌MAX)
3-pin headers
Shunts (JU1, JU2)
MAX1817 PC board
MAX1817 data sheet
MAX1817 EV kit data sheet
o
Fully Assembled and Tested
Ordering Information
PART
MAX1817EVKIT
TEMP. RANGE
0擄C to +70擄C
IC PACKAGE
10 碌MAX
C1
1
Component Suppliers
SUPPLIER
Central Semiconductor
Murata
Nihon
Sumida
Taiyo Yuden
TDK
PHONE
631-435-1110
814-237-1431
661-867-2555
847-956-0666
408-573-4150
847-803-6100
FAX
631-435-3388
814-238-0490
661-867-2698
847-956-0702
408-573-4159
847-803-6296
C2
1
C3
1
C4
C5, C6
R1
R2
R3, R4
D1
D2
L1, L2
U1
JU1, JU2
None
None
None
None
1
0
1
1
0
1
1
2
1
2
2
1
1
1
Note:
Please indicate that you are using the MAX1817 when
contacting these component suppliers.
Quick Start
The MAX1817 EV kit is a fully assembled and tested
surface-mount board. Follow the steps below for board
operation.
Do not turn on the power supply until all
connections are completed.
1) Verify that shunts are across pins 1 and 2 of
jumpers JU1 and JU2 to enable the main output
and the LCD output, respectively.
2) Connect a voltmeter across the VOM pad and the
nearest GND pad to monitor the main output voltage.
3) Connect a voltmeter across the VOLCD pad and
the nearest GND pad to monitor the LCD output
voltage.
4) Connect a +1.5V to +3.3V supply to the VBATT
pad. Connect the ground to the GND pad.
5) Turn on the power supply and verify that the main
output VOM is at +3.3V and the VOLCD output is at
+18.0V.
1
________________________________________________________________
Maxim Integrated Products
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim鈥檚 website at www.maxim-ic.com.
1
2
3
4
