April 2004
LM5033
100V Push-Pull Voltage Mode PWM Controller
General Description
The LM5033 High Voltage PWM controller contains all the
features needed to implement Push-Pull, Half-Bridge, and
Full-Bridge topologies. Applications include closed loop volt-
age mode converters with a highly regulated output voltage,
or an open loop "DC transformer" such as an Intermediate
Bus Converter (IBC) with an efficiency
>
95%. The small 10
pin LLP-10 package with exposed pad provides for efficient
thermal management. Two alternating gate driver outputs
with a guaranteed deadtime are provided. The LM5033 in-
cludes a start-up regulator that operates over a wide input
range of 15V to 100V. Additional features include: precision
voltage reference output, current limit detection, remote
shutdown, softstart, sync capability and thermal shutdown.
This high speed IC has total propagation delays less than
100 ns and a 1MHz capable oscillator.
Features
n
n
n
n
n
n
n
n
n
Internal high voltage (100V) start-up regulator
Single resistor oscillator setting
Synchronizable
Precision reference output
Adjustable soft-start
Over-current protection
Direct optocoupler interface
1.5A peak gate drivers
Thermal Shutdown
Applications
n
n
n
n
Intermediate DC/DC Bus Converter
Telecommunication Power Converters
Industrial Power Converters
+42V Automotive Systems
Package
n
LLP-10
Connection Diagram
20035401
10 -Lead Plastic, Dual, LLP
Ordering Information
Order Number
LM5033SD
LM5033SDX
Package Type
LLP-10 (4 x 4 mm)
LLP-10 (4 x 4 mm)
NSC Package Drawing
SDC10A
SDC10A
Supplied As
1000 Units on Tape and Reel
4500 Units on Tape and Reel
漏 2004 National Semiconductor Corporation
DS200354
www.national.com