鈮?/div>
2.5V). The wide input voltage range
(2.0V-4.4V) allows this device to be powered from several
types of batteries, including single cell lithium-ion, two-cell
alkaline, nickel-metal-hydride, and nickel-cadmium. The
LM2760 solution does not require an inductor and needs
only three small external ceramic capacitors. The miniscule
quiescent current of the part, typically 10碌A(chǔ) unloaded,
makes the LM2760 ideal for low-current standby power rails.
The LM2760 is a switched-capacitor circuit that is controlled
by a gated oscillator. Both a low-input-voltage boost mode
and high-input-voltage pass mode are implemented to opti-
mize efficiency over the full input voltage range.
Additional features of the LM2760 include thermal protection
and current limiting. The LM2760 is available in a small,
five-pin SOT-23 package.
Features
n
n
n
n
n
n
n
n
n
n
n
3.3V
鹵
4% Regulated Output
Ultralow Power: 10碌A(chǔ) Typical Supply Current
Boost and Pass Modes for Improved Efficiency
Input Voltage Range: 2.0V to 4.4V
Output Current up to 20mA (V
IN
鈮?/div>
2.5V)
Output Current up to 10mA (V
IN
鈮?/div>
2.0V)
Inductorless solution
Small external parts count: 3 ceramic capacitors
750kHz Switching Frequency
SOT23-5 Package
Short-Circuit and Thermal Protection
Applications
n
n
n
n
Battery-Operated Devices
Cellular Phone
Standby Power Supply
Memory Keep-alive Power
Typical Application Circuit
20044301
漏 2002 National Semiconductor Corporation
DS200443
www.national.com
next