鈥?/div>
HOLD pin > INT0 pin > INT1 pin > INT2 pin >
INT3 pin > INT4 pin > INT5 pin > S-I/O0 > S-I/O1
> S-I/O2 > internal TMR0 > internal TMR1 >
internal TMR2 > internal TMR3
A/D converter
鈥?8-bit resolution and 8 inputs
General-purpose ports
鈥?Input ports: 12
鈥?Output ports : 4
鈥?I/O ports: 62 (These pins can be switched between
input and output in 1-bit units.)
PLL block
鈥?Includes a sub-charge pump for high-speed locking.
鈥?Supports dead zone control.
鈥?Built-in unlock detection circuit.
鈥?Twelve reference frequencies: 1, 3, 3.125, 5, 6.25, 9,
10, 12.5, 25, 30, 50, and 100 kHz.
鈥?A second PLL circuit is also included for use in AM
up conversion.
Universal counter
鈥?This 20-bit counter can be used for either frequency
or period measurement and supports four
measurement (calculation) periods: 1, 4, 8, and 32 ms.
Timers
鈥?Two fixed timers and two programmable timers (8-
bit counters)
TMR0: Supports four periods: 10 碌s, 100 碌s, 1 ms,
and 5 ms
TMR1: Supports four periods: 10 碌s, 100 碌s, 1 ms,
and 10 ms
TMR2 and TMR3: Programmable 8-bit counters.
Input clocks with 10 碌s, 100 碌s, and 1 ms periods
are provided.
鈥?One 125-ms timer flip-flop provided.
Beep circuit
鈥?Provides 12 fixed beep tones: 0.5, 1, 2, 2.08, 2.2,
2.5, 3.33, 3.75, 4.17, and 7.03 kHz.
鈥?Programmable 8-bit beep tone generator. Reference
clocks with frequencies of 5 kHz, 15 kHz, and 50
kHz are provided.
Reset
鈥?Built-in voltage detection reset circuit
鈥?External reset pin
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51398RM (OT) No.5931-1/14