鈼?/div>
Standard 24 Pin DIP Package & SMT Type Package
SPECIFICATIONS:
LANCW8 Series
All specifications apply @ 25擄C ambient unless otherwise noted
INPUT SPECIFICATIONS
Input Voltage Range ............ 12V nominal input .......................... 9-18VDC
24V nominal input ........................ 18-36VDC
48V nominal input ........................ 36-75VDC
Input Filter ....................................................................................... Pi Type
Input Surge Voltage (100ms max) ....... 12V input ...........................36VDC
24V input ...........................50VDC
48V input .........................100VDC
Input Reflected Ripple Current (nominal Vin and full load) ...........20mAp-p
Start Up Time (nominal Vin and constant resistive load) .........700ms max.
Remote ON/OFF (See Note 6)
(Positive Logic)............... DC-DC ON .............Open or 3.5V < Vr < 12V
DC-DC OFF .............Short or 0V < Vr < 1.2V
Input Current of Remote Control Pin (nominal Vin) ........ -0.5mA ~ +0.5mA
Remote Off State Input Current (nominal Vin) ..................................2.5mA
GENERAL SPECIFICATIONS (Continued)
Isolation Voltage
Input to Output ............................................................... 1600VDC min.
Input (Output) to Case (DIP).......................................... 1600VDC min.
Input (Output) to Case (SMT) ........................................ 1000VDC min.
Isolation Resistance ...............................................................10 ohms min.
Isolation Capacitance ............................................................... 300pF max.
9
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature ................................ -40擄C ~ +85擄C (with derating)
Storage Temperature .......................................................... -55擄C ~ +105擄C
Maximum Case Temperature ............................................................. 100擄C
Relative Humidity (non-condensing) .....................................5% to 95% RH
Thermal Impedance (Natural Convection) ................................. 20擄C / Watt
Thermal Shock ..................................................................... MIL-STD-810F
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
MTBF (See Note 1) .......................................................... 3.053 x 10 hours
6
OUTPUT SPECIFICATIONS
Output Voltage ..............................................................................see table
Voltage Accuracy (nominal Vin and full load) ...................................... 鹵1%
Output Current ..............................................................................see table
Output Power .......................................................................... 8 watts max.
Line Regulation (LL to HL at FL)....................................................... 鹵0.2%
Load Regulation (no load to full load) ...... Single Output (DIP) ....... 鹵0.5%
Single Output (SMT).......... 鹵1%
Dual Output (SMT, DIP) .... 鹵1%
Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ 鹵5%
Minimum Load ....................................................................................... 0%
Ripple/Noise (20 MHz BW) ...........................................................50mVp-p
Temperature Coefficient ................................................. 鹵0.02% / 擄C max.
Transient Response Recovery Time (25% load step) .......................200us
PHYSICAL SPECIFICATIONS
Weight ....................................DIP Type ................................. 16g (0.55 oz)
SMT Type................................ 18g (0.62 oz)
Dimensions................... 1.25 x 0.80 x 0.40 inches (31.8 x 20.3 x 10.2 mm)
Case Material ..............................................................Nickel-coated copper
Base Material...................................................Non-conductive black plastic
Potting material..................................................................Epoxy (UL94-V0)
Shielding...................................................................................... five - sided
SAFETY & EMC
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
EMI (Note 7) .......................EN55022 .............................................. Class A
ESD ....................EN61000-4-2鈥︹€?.
Air 鹵 8KV 鈥︹€?Perf. Criteria B
Contact 鹵 6KV
PROTECTION SPECIFICATIONS
Over Load Protection (% of full load at nominal input).............. 150% max.
Short Circuit Protection. ............................Continuous, automatic recovery
Radiated Immunity..............EN61000-4-3............... 10V/m Perf. Criteria A
Fast Transient.....................EN61000-4-4................. 鹵2KV Perf. Criteria B
Surge (See Note 8).............EN61000-4-5................. 鹵1KV Perf. Criteria B
Conducted Immunity...........EN61000-4-6............ 10 Vrms Perf. Criteria A
GENERAL SPECIFICATIONS
Efficiency.......................................................................................see table
Switching Frequency................................................................300KHz typ.
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
1
2
3
