鈩?/div>
Low switching distortion at high frequencies.
Minimum number of external parts required: 9 pcs. min.
(Stereo/bridge).
Small shock noise at the time of power supply ON/OFF due
to built-in muting circuit.
Good ripple rejection due to built-in ripple filter.
Soft tone at the time of output saturation.
Good channel separation.
Voltage gain fixed at 45 dB (Bridge: 51 dB).
Variable voltage gain available with external resistor added.
3022A-DIP12F
[LA4183]
SANYO : DIP12F
Note:
In general applications, heat generated in the DIP 12-pin
package can be radiated through the Cu-foiled area of the
printed circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load conditions,
it is recommended to use a fin additionally.
Specifications
Maximum Ratings
at Ta = 25擄C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
V
CC
max
Pd max
Topr
Tstg
With signal
Quiescent
With printed circuit board
(Refer to Pd 鈥?Ta characteristics)
Conditions
Ratings
11
15
4
鈥?0 to +75
鈥?5 to +150
Unit
V
V
W
擄C
擄C
Operating Conditions
at Ta = 25擄C
Parameter
Recommended supply voltage
Load resistance
Symbol
V
CC
R
L
Stereo
Bridge
Conditions
Ratings
9.0
4.0 to 8.0
8.0
Unit
V
鈩?/div>
鈩?/div>
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
53096HA(II)/O0207TA/2022KI,TS,ID No.887-1/11
next