鈻?/div>
Two full bridges for max. 1.3 A load (R
DSON
=
500 m鈩?
Programmable current waveform with look-up
table: 9 entries with 5bit resolution
Current regulation by integrated PWM
controller and internal current sensing
Programmable stepping mode: Full, Half, Mini
and Microstepping
Programmable slew rate for EMC and power
dissipation optimisation
Programmable Fast-, Slow-, Mixed-and Auto-
Decay Mode
Full-Scale Current programmable with 3bit
resolution
Very low current consumption in standby mode
I
S
< 3碌A(chǔ), typ. T
j
鈮?/div>
85 擄C
All outputs short circuit protected with
Openload, Overloadcurrent, Temperature
Warning and Thermal Shutdown
The PWM signal of the internal PWM controller
is available as digital output.
All parameters guaranteed for 7V < Vs < 20V
PowerSSO-24
Description
The device is an integrated stepper motor driver
for bipolar stepper motors with microstepping and
programmable current profile look-up-table to
allow a flexible adaptation of the stepper motor
characteristics and intended operating conditions.
It is possible to use different current profiles
depending on target criteria: audible noise,
vibrations, rotation speed or torque. The decay
mode used in PWM-current control circuit can be
programmed to slow-, fast-, mixed-and auto-
decay. In autodecay mode device will use slow
decay mode if the current for the next step will
increase and the fast decay or mixed decay mode
if the current will decrease.
鈻?/div>
鈻?/div>
Applications
Stepper Motor Driver for bipolar Stepper Motors in
Automotive Applications like Light Levelling,
Bending Light and Throttle Control.
Order codes
Part number
L9942
Junction Temp range,
擄C
-40 to 150
Package
PowerSSO-24
Packing
Tube
November 2005
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
Rev 1
1/37
www.st.com
37
next