廬
ISL6548
Data Sheet
February 9, 2005
FN9188.1
ACPI Regulator/Controller for
Dual Channel DDR Memory Systems
The ISL6548 provides a complete ACPI compliant power
solution for up to 4 DIMM dual channel DDR/DDR2 Memory
systems. Included are both a synchronous buck controller to
supply V
DDQ
during S0/S1 and S3 states. During S0/S1
state, a fully integrated sink-source regulator generates an
accurate (V
DDQ
/2) high current V
TT
voltage without the
need for a negative supply. Two LDO controllers are also
integrated for the GMCH core voltage regulation and for the
GMCH/CPU V
TT
termination voltage regulation.
The switching PWM controller drives two N-Channel
MOSFETs in a synchronous-rectified buck converter
topology. The synchronous buck converter uses voltage-
mode control with fast transient response. The switching
regulator provides a maximum static regulation tolerance of
鹵
2% over line, load, and temperature ranges. The output is
user-adjustable by means of external resistors down to 0.8V.
An integrated soft-start feature brings all outputs into
regulation in a controlled manner when returning to S0/S1
state from any sleep state. During S0 the VIDPGD signal
indicates that the GMCH/CPU V
TT
termination voltage is
within spec and operational.
Each output is monitored for undervoltage events. The
switching regulator also has overvoltage and overcurrent
protection. Thermal shutdown is integrated.
Features
鈥?Generates 4 Regulated Voltages
- Synchronous Buck PWM Controller for DDR V
DDQ
- 3A Integrated Sink/Source Linear Regulator with
Accurate VDDQ/2 Divider Reference for DDR V
TT
- LDO Regulator for GMCH Core
- Sink/Source LDO Regulator for CPU/GMCH V
TT
Termination
鈥?ACPI compliant sleep state control
鈥?Glitch-free Transitions During State Changes
鈥?PWM Controller Drives Low Cost N-Channel MOSFETs
鈥?250kHz Constant Frequency Operation
鈥?Tight Output Voltage Regulation
- All Outputs:
鹵
2% Over Temperature
鈥?Fully-Adjustable Outputs with Wide Voltage Range: Down
to 0.8V supports DDR and DDR2 Specifications
鈥?Simple Single-Loop Voltage-Mode PWM Control Design
鈥?Fast PWM Converter Transient Response
鈥?Under and Overvoltage Monitoring on All Outputs
鈥?OCP on the Switching Regulator
鈥?Integrated Thermal Shutdown Protection
鈥?Pb-Free Available (RoHS Compliant)
Applications
鈥?Single and Dual Channel DDR Memory Power Systems in
ACPI compliant PCs
鈥?Graphics cards - GPU and memory supplies
鈥?ASIC power supplies
鈥?Embedded processor and I/O supplies
鈥?DSP supplies
Pinout
ISL6548 (6x6 QFN)
TOP VIEW
OCSET
22
21 DRIVE4
20 REFADJ4
19 DRIVE3
GND
29
18 FB3
17 FB4
16 COMP
15 FB
8
VDDQ
9
DDR_VTTSNS
10
DRIVE2_U
11
FB2
12
VIDPGD
13
DRIVE2_L
14
VREF_IN
PHASE
24
UGATE
LGATE
BOOT
GND
S5#
23
28
5VSBY
S3#
P12V
GND
DDR_VTT
DDR_VTT
VDDQ
1
2
3
4
5
6
7
27
26
25
Ordering Information
TEMP.
PART NUMBER RANGE (擄C)
ISL6548CRZ
(Note)
ISL6548CRZ-T
(Note)
ISL6548CRZ A
(Note)
ISL6548CRZA-T
(Note)
0 to 70
0 to 70
0 to 70
0 to 70
PACKAGE
PKG.
DWG. #
28 Ld 6x6 QFN (Pb-free) L28.6x6
28 Ld 6x6 QFN
L28.6x6
Tape and Reel (Pb-free)
28 Ld 6x6 QFN (Pb-free) L28.6x6
28 Ld 6x6 QFN
L28.6x6
Tape and Reel (Pb-free)
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish, which are
RoHS compliant and compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.