廬
ISL6526
Data Sheet
July 2003
FN9055.3
Single Synchronous Buck Pulse-Width
Modulation (PWM) Controller
The ISL6526 makes simple work out of implementing a
complete control and protection scheme for a DC-DC
stepdown converter. Designed to drive N-Channel
MOSFETs in a synchronous buck topology, the ISL6526
integrates the control, output adjustment, monitoring and
protection functions into a single package.
The ISL6526 provides simple, single feedback loop, voltage-
mode control with fast transient response. The output
voltage can be precisely regulated to as low as 0.8V, with a
maximum tolerance of 鹵1.5% over temperature and line
voltage variations. A fixed frequency oscillator reduces
design complexity, while balancing typical application cost
and efficiency.
The error amplifier features a 15MHz gain-bandwidth
product and 6V/碌s slew rate which enables high converter
bandwidth for fast transient performance. The resulting
PWM duty cycles range from 0% to 100%.
Protection from overcurrent conditions is provided by
monitoring the r
DS(ON)
of the upper MOSFET to inhibit PWM
operation appropriately. This approach simplifies the
implementation and improves efficiency by eliminating the
need for a current sense resistor.
Features
鈥?Operates from 3.3V to 5V Input
鈥?0.8V to V
IN
Output Range
- 0.8V Internal Reference
- 鹵1.5% Over Load, Line Voltage and Temperature
鈥?Drives N-Channel MOSFETs
鈥?Simple Single-Loop Control Design
- Voltage-Mode PWM Control
鈥?Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Cycle
鈥?Lossless, Programmable Overcurrent Protection
- Uses Upper MOSFET鈥檚 r
DS(on)
鈥?Converter can Source and Sink Current
鈥?Small Converter Size
- Internal Fixed Frequency Oscillator
- ISL6526: 300kHz
- ISL6526A: 600kHz
鈥?Internal Soft-Start
鈥?14 Lead SOIC or 16 Lead, 5x5 QFN
鈥?QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat
No Leads - Package Outline
- Near Chip Scale Package footprint, which improves
PCB efficiency and has a thinner profile
Ordering Information
TEMP
PART NUMBER RANGE (
o
C)
ISL6526CB
ISL6526ACB
ISL6526CR
ISL6526ACR
ISL6526IB
ISL6526AIB
ISL6526IR
ISL6526AIR
ISL6526EVAL1
ISL6526EVAL2
0 to 70
0 to 70
0 to 70
0 to 70
-40 to 85
-40 to 85
-40 to 85
-40 to 85
PACKAGE
14 Lead SOIC
14 Lead SOIC
PKG DWG. #
M14.15
M14.15
Applications
鈥?Power Supplies for Microprocessors
- PCs
- Embedded Controllers
鈥?Subsystem Power Supplies
- PCI/AGP/GTL+ Busses
- ACPI Power Control
- DDR SDRAM Bus Termination Supply
鈥?Cable Modems, Set Top Boxes, and DSL Modems
鈥?DSP and Core Communications Processor Supplies
鈥?Memory Supplies
鈥?Personal Computer Peripherals
鈥?Industrial Power Supplies
鈥?3.3V-Input DC-DC Regulators
鈥?Low-Voltage Distributed Power Supplies
16 Lead 5x5 QFN L16.5x5B
16 Lead 5x5 QFN L16.5x5B
14 Lead SOIC
14 Lead SOIC
M14.15
M14.15
16 Lead 5x5 QFN L16.5x5B
16 Lead 5x5 QFN L16.5x5B
ISL6526 SOIC Evaluation Board
ISL6526 QFN Evaluation Board
ISL6526AEVAL1 ISL6526A SOIC Evaluation Board
ISL6526AEVAL2 ISL6526A QFN Evaluation Board
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2003. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.