廬
ISL59885
Data Sheet
August 15, 2007
FN7442.6
Auto-Adjusting Sync Separator for HD
and SD Video
The ISL59885 video sync separator extracts sync timing
information from both standard and non-standard video
inputs in the presence of Macrovision pulses. The ISL59885
provides horizontal, vertical, and composite sync outputs as
well as SD/HDTV detection. An auto input frequency detect
feature automatically adapts to a wide range of video
standards (it does not need a different RSET resistor for
different frequencies). The vertical sync pulse is output on
the rising edge of the first vertical serration following the
vertical pre-equalizing string. For non-standard vertical
inputs, a default vertical pulse is output when the vertical
signal stays low for longer than the vertical sync default
delay time. The horizontal output gives horizontal timing with
pre/post equalizing pulses. Fixed 70mV sync tip slicing
provides sync edge detection when the video input level is
between 0.5V
P-P
and 2V
P-P
.
The ISL59885 is available in an 8 Ld SOIC package and is
specified for operation over the full -40擄C to +85擄C
temperature range.
Features
鈥?NTSC, PAL, SECAM, HDTV, non-standard video sync
separation
鈥?Fixed 70mV slicing of video input levels from 0.5V
P-P
to
2V
P-P
鈥?Single 3V to 5V supply
鈥?Composite sync output
鈥?Vertical output
鈥?Horizontal output
鈥?HDTV detection
鈥?Macrovision compatible
鈥?Available in 8 Ld SOIC package
鈥?Pb-free available (RoHS compliant)
Applications
鈥?High definition video equipment
Demo Board
鈥?A dedicated demo board is available
Pinout
ISL59885
(8 LD SOIC)
TOP VIEW
COMPOSITE SYNC OUT 1
COMPOSITE VIDEO IN 2
VERTICAL SYNC OUT 3
GND 4
8 VDD
7 HORIZONTAL OUTPUT
6 CSET
5 HD
Ordering Information
PART
NUMBER
ISL59885IS*
ISL59885ISZ* (Note)
PART
MARKING
59885 IS
59885 ISZ
PACKAGE
8 Ld SOIC
8 Ld SOIC
(Pb-free)
PKG. DWG. #
MDP0027
MDP0027
*Add 鈥?T7鈥?or 鈥?T13鈥?suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2005, 2006, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.