Integrated
Circuit
Systems, Inc.
ICS9148-47
Pentium/Pro
TM
System Clock Chip
General Description
The
ICS9148-47
is part of a reduced pin count two-chip clock
solution for designs using an Intel BX style chipset.
Companion SDRAM buffers are ICS9179-11 and 聳12.
There are two PLLs, with the first PLL capable of spread
spectrum operation. Spread spectrum typically reduces system
EMI by 8-10dB. The second PLL provides support for USB
(48MHz) and 24MHz requirements. CPU frequencies up to
100MHz are supported.
The I
2
C interface allows stop clock programming, frequency
selection, and spread spectrum operation to be programmed.
Clock outputs include two CPU (2.5V or 3.3V), seven PCI
(3.3V), one REF (3.3V), one IOAPIC (2.5V or 3.3V), one 48MHz,
and one selectable 48/24MHz.
Features
聲
聲
聲
聲
聲
聲
聲
聲
聲
聲
Generates system clocks for CPU, PCI, IOAPIC ,
14.314 MHz, 48 and 24MHz.
Supports single or dual processor systems
Skew from CPU (earlier) to PCI clock 1 to 4ns
Separate 2.5V and 3.3V supply pins
2.5V outputs: CPU, IOAPIC
3.3V outputs: PCI, REF
No power supply sequence requirements
28 pin SOIC
Spread Sectrum operation optional for PLL1
CPU frequencies to 100MHz are supported.
Pin Configuration
Block Diagram
28 pin SOIC
Power Groups
VDD = Supply for PLL core
VDD1 = REF0, X1, X2
VDD2 = PCICLK_F, PCICLK (0:5)
VDD3 = 48MHz
VDDL = CPUCLK (0:1)
VDDL1=IOAPIC
Ground Groups
GND = Ground Source Core
GND1 = REF0, X1, X2
GND2 = PCICLK_F, PCICLK (0:5)
GND3=48MHz
GNDL = CPUCLK (0:1)
Pentium is a trademark on Intel Corporation.
9148-47 Rev D 08/04/98
ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.
1
2
3
4
5
6
7
8
9
