Integrated
Circuit
Systems, Inc.
ICS9148-11
Frequency Generator & Integrated Buffers for PENTIUM
TM
General Description
The
ICS9148-11
generates all clocks required for high speed RISC
or CISC microprocessor systems such as Intel PentiumPro. An
output enable pin is provided for testability. MODE allows power
management functions: CPU_STOP#, PCI_STOP# &
PWR_DWN#.
High drive BCLK outputs typically provide greater than 1V/ns slew
rate into 30 pF loads. PCLK outputs typically provide better than 1V/
ns slew rate into 20 pF loads while maintaining
50鹵
5% duty cycle.
The REF clock outputs typically provide better than 0.5V/ns slew
rates.
Features
聲
聲
聲
聲
聲
聲
聲
聲
聲
聲
Generates four processor, six bus, one 14.31818MHz and 12
SDRAM clocks.
Synchronous clocks skew matched to 250ps window on
CPU, SDRAM and 500ps window on BUS clocks.
CPUCLKs to BUS clocks skew 1-4 ns (CPU early)
Test clock mode eases system design
Custom configurations available
VDD(1:3) - 3.3V 鹵10%
(inputs 5V tolerant w/series R )
VDDL(1:2) - 2.5V or 3.3V 鹵5%
PC serial configuration interface
Power Management Control Input pins
48-pin SSOP package
Block Diagram
Pin Configuration
48-Pin SSOP
Functionality
OE
CPUCLK,
SDRAM
(MHz)
High-Z
66.6
X1, REF
(MHz)
PCICLK
(MHz)
0
1
High-Z
14.318
High-Z
33.3
Pentium is a trademark of Intel Corporation
I
2
C is a trademark of Philips Corporation
9148-11 RevB 12/09/97P
ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.