Card Bus Socket Connectors
IC9 Series
sFeatures
1. Compliant with PC Card Standards
Complies with latest requirements of PC Card
Standard.
2. Repairable
Repairable terminations of connector solder
joints after installation on the board.
3. Lead Offset
Available with two board mounting levels of
terminations, to allow use of different height
components.
sProduct
Specifications
Ratings
Current rating 0.5 A
Operating temperature -55莽 to +85莽 (Note 1)
Storage temperature
-10莽 to +60莽 (Note 2)
40 to 70% (Note 2)
Voltage rating 125 V AC Operating humidity
95% R.H. or less (No condensation) Storage humidity
Item
1. Insulation resistance
2.
Withstanding voltage
3. Contact resistance
4. Vibration
Specification
1000M
ohms
min.
No flashover or insulation breakdown.
40 m
ohms
max. (initial value)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Conditions
Frequency: 10 to 2000 Hz, single amplitude of 0.75 mm or
acceleration of 147 m/s
2
(peak), 4 hours in each of the 3 directions.
96 hours at temperature of 40莽 and humidity of 90% to 95%
-55莽, 30 min/15 to 30莽, within 5 min/85莽30 min
/15
to 35莽, within 5 min, for 5 cycles
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300莽 for 3 seconds
5.
Humidity (Steady state)
Insulation resistance: 100 M
ohms
min.
6.
Temperature cycle
7.
Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
No damage, cracks, or parts looseness.
Change of contact resistance from the
start should be 20 m
ohms
max.
No deformation of components
affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Ground plate
Material
PA
Phosphor bronze
Brass
Lead Area
Lead Area
Finish
Black
Contact Area : gold plating
: solder plating
: solder plating
Contact Area : gold plating
Notes
UL94V-0
-----------------
-----------------
A48
1
2
3
4
