Product Data Sheet
3.0 W
ATT
M
INIATURE
SIP DC/DC C
ONVERTER
HPR2XX
FEATURES
!
!
!
Four Channels Of Isolated Power
High Output Power Density: > 9. 4 Watts/Inch
3
Extended Temperature Range:
-25擄C To +85擄C
High Efficiency: To 84%
Low Cost
!
High Isolation Voltage: 750V Continuous
Input-to-Output and Channel-to-Channel
Single In-line Package (SIP)
Internal Input and Output Filtering
Non-Conductive Case
!
!
!
!
!
The HPR2XX Series is designed for multiple channel applications
that require small size and could benefit from a complete one-
package solution. The HPR2XX Series offers four isolated
channels of output power in a footprint less than the size of many
singular devices. This unregulated series of DC/DC converters
provides three watts of total output power. Each isolated channel
can supply up to 750mW.
The HPR2XX Series uses advanced circuit design and packaging
technology to realize superior reliability and performance. With
only one switching converter on the board, the HPR2XX
eliminates the possibility of separate converters creating beat
frequencies, or "aliasing" in multiple channel applications.
The high efficiency of the HPR2XX Series means less internal
power dissipation than comparable solutions. With reduced heat
to dissipate, the HPR2XX Series can operate at higher
temperatures with no degradation in reliablility. In addition, the
high efficiency of the HPR2XX Series provides greater than 9
watts/inch
3
output power density.
The HPR2XX Series offers the user low cost without sacrificing
reliability. The use of surface mounted devices and manufacturing
technologies make it possible to offer premium performance and
low cost.
MECHANICAL
2.210+.010
(56.13)
PIN CONNECTIONS
1. -VOUT1 5.-VOUT2
0.340+.010
(8.64)
2. COM 1 6. COM2
3 +VOUT1 7.+VOUT2
9. +VIN
14. -VOUT3
18. -VOUT4
19. COM 4
10.-VIN 15. COM3
TOP
VIEW
16. +VOUT3 20. +VOUT4
0.340+.010
(8.64)
FRONT
VIEW
0.030+.010
(0.76)
0.020+.002
(0.51)
0.400+.010
(10.16)
RIGHT
SIDE
VIEW
0.140+.020
(0.25)
0.010+.002
(0.25)
0.050+.015
(1.27)
0.155+.015
(3.94)
BOTTOM
VIEW
1 2 3
5 6 7
9 10
14 15 16
18 19 20
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: 鹵 0.015"
Marked with: specific model ordered, date code, and job code.
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537
Fax: 520.770.9369
HPR2XX REV D 4/99
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133
Fax:+353.61.474.141
Page 1
1
2
3
