3 dB 90擄 Card Couplers
HD-M Series
s
Features
1.High Performance
The high frequency characteristics feature.
Extremely low loss and a high degree of matching.
2.Power Uniform Distribution and
90擄 Phase Difference Type
HD-0053M3-IH
HD-0195M3-DH
HD-0195M3-DH-1
HD-0900M3-CH-1
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90擄 phase difference between the two outputs (or
two inputs).
3.Miniature and Lightweight
HD-0620M3-EH
HD-1700M3-FH
HD-3900M3-BH
HD-0313M3-FH
Corrosion-resistant aluminum is used for the cover
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be extremely small and lightweight.
HD-2100M3-CH
HD-1800M3-CH
HD-3200M3-BH
HD-6150M3-AH
4.Equipped with Tabs
Tabs permit direct mounting to surface circuits.
5.High Power Type
This type can be used with up to 100 W of power.
s
Product Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
30 to 6400 MHz
50
ohms
50 to 100 W
Operating temperature range
Operating relative humidity
-10莽 to +65莽
95% Max.
Note: The frequency range and the maximum input power will differ depending on the products.
Item
1.Insulation resistance 500M
ohms
min
2.Vibration
3.Shock
Standard
100 V DC
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
No electrical discontinuity of 1
碌s
or more
No damage, cracks, or parts dislocation
acceleration of 98 m/s
2
for 2 hours in each of 3 directions
Acceleration of 980 m/s
2
, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature : -55莽
隆
+5莽 to +35莽
隆
+85莽
隆
+5莽 to +35莽
Time : 30
隆
15 max.
隆
30
隆
15 max. (Minutes)
200 cycles
Exposed to 20% salt water solution for 48 hours
Exposed to 10% potassium sulfide solution for 100 hours
4.Temperature cycle No damage, cracks, or parts dislocation
5.Corrosion resistance No serious corrosion
6.Hydrogen sulfide gas No damage, cracks, or parts dislocation
q
The test method conforms to MIL-STD-202.
s
Materials
Part
Cover (A)
Cover (B)
Board
Rivets
Eyelet
Tabs
Cover (A)
Cover (B)
Material
Stainless steel
Aluminum
Dielectric
Aluminum
Brass
Phosphor bronze
Stainless steel
Stainless steel
Finish
---------
Conductive white Alumite
Gold plating
---------
Nickel plating
Gold plating
---------
---------
27
1
2
3
4
5
6
7
8
9
