Support Components
Galileo Technology, Inc.
GT-96010A
Remote Access Coprocessor
for IDT RISController CPUs
Features
x
Description
The GT-96010A provides all of the system peripherals needed to
build a high-performance LAN-to-WAN connectivity device around
a variety of embedded microprocessors, such as the IDT RC32364.
Included in the GT-96010A are multiprotocol serial ports, an
Ethernet controller, WAN PHY interfaces, and core logic.
The GT-96010A is the result of the marriage of Galileo's strengths
in both system control and communications technology. Unlike
other WAN devices, the GT-96010A uses hardware serial engines,
allowing new levels of system performance for emerging applications
such as ADSL and high-speed Frame Relay.
Integrated high-performance serial communications engine
and core logic device
-
Six high bit rate multi-protocol serial controllers
-
10BaseX perfect filtering Ethernet MAC
-
Two programmable Flex-TDM
TM
time slot assigners
-
14 serial DMA engines and 1 independent DMA engine
-
DRAM and device controller
Applications
-
ADSL/xDSL
-
ISDN (up to two BRI)
-
T1/E1, V.35, and X.21 WAN connections
-
6 channels of E1/T1 rate Frame Relay
-
Remote access servers
Six high-speed multiprotocol serial controllers
-
Bandwidth up to 8Mbps full duplex per channel
-
Synchronous/asynchronous RX/TX operation
-
Supports HDLC, BiSync, UART and transparent modes
-
Can be used directly or connected to Flex-TDM
-
Up to eight GT-96010As can be cascaded to provide 48
channels
Two Flex-TDM channels (time slot assigners)
-
Supports 6 serial channels and 2 auxiliary channels
-
Highly programmable, can support many standards
including GCI, IDL, PCM
10Mbps full duplex perfect filtering Ethernet controller
-
Direct interface to common SIA devices
-
Programmable filtering of 1/2K or 8K MAC addresses
Four Baud rate generators
System control functions
-
DRAM/device controller
-
Timer/counters
-
Independent fly-by DMA engine
-
and more....
x
x
x
x
x
x
CPUs Supported
RC32364
196