鈥?/div>
SMPTE 292M Serial Digital Interfaces
SMPTE 259M-C Serial Digital Interfaces
DVB-ASI Serial Digital Interfaces
DESCRIPTION
The GS1560A is a reclocking deserializer with a serial loop-
through cable driver. When used in conjunction with the
GS1524 Automatic Cable Equalizer and the GO1525
Voltage Controlled Oscillator, a receive solution can be
realized for HD-SDI, SD-SDI and DVB-ASI applications.
In addition to reclocking and deserializing the input data
stream, the GS1560A performs NRZI-to-NRZ decoding,
descrambling as per SMPTE 292M/259M-C, and word
alignment when operating in SMPTE mode. When operating
in DVB-ASI mode, the device will word align the data to
K28.5 sync characters and 8b/10b decode the received
stream.
Two serial digital input buffers are provided with a 2x1
multiplexer to allow the device to select from one of two
serial digital input signals.
The integrated reclocker features a very wide Input Jitter
Tolerance of 鹵0.3 UI (total 0.6 UI), a rapid asynchronous
lock time, and full compliance with DVB-ASI data streams.
A integrated cable driver is provided for serial input loop-
through applications and can be selected to output either
buffered or reclocked data. This cable driver also features
an output mute on loss of signal, high impedance mode,
adjustable signal swing, and automatic dual slew-rate
selection depending on HD/SD operational requirements.
The GS1560A also includes a range of data processing
functions such as error detection and correction, automatic
standards detection, and EDH support. The device can
also detect and extract SMPTE 325M payload identifier
packets and independently identify the received video
standard. This information is read from internal registers via
the host interface port.
Line-based CRC errors, line number errors, TRS errors,
EDH CRC errors and ancillary data checksum errors can all
be detected. A single 鈥楧ATA_ERROR鈥?pin is provided which
is a logical 'OR'ing of all detectable errors. Individual error
status is stored in internal 鈥楨RROR_STATUS鈥?registers.
Finally, the device can correct detected errors and insert
new TRS ID words, line-based CRC words, ancillary data
checksum words, EDH CRC words, and line numbers.
Illegal code re-mapping is also available. All processing
function may be individually enabled or disabled via host
interface control.
GS1560A
Revision Date: July 2003
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com
Document No. 27360 - 2