鈥?/div>
Pulse at 100 mA
Spectral width 60 nm
Bandwidth of 200 MHz
Operating temperature-10隆C to +65隆C
OPHO_229.doc
DESCRIPTION
The GFE1300-547 is a high performance 1300 nm Edge
emitting LED specifically designed for coupling high
power into Monomode optical fibers.
When pulsed at 100mA typical coupled power into 9/125
碌m fiber is 15 碌w. Bandwidth is typically 200 MHz.
Where applicable, standard pin orientation aligns pin 2
with the receptacle keyway. This orientation will be
supplied unless requested otherwise.
The heatsink tab is removed to allow alignment in some
receptacles.
This device is very susceptible to damage by electrostatic
discharge.
All dimensions are in millimetres. Tolerances are 鹵 0.10
mm unless otherwise stated.
Receptacle illustrated with typical active device installed.
High precision ceramic bore.
Device alignment to fibre tested with AT&T ST2
connector.
OUTLINE DIMENSIONS in inches (mm)
ODIM_234.tif
Pinout
1. Cathode
2. Anode
3. Case
ST is a registered trademark of AT & T.
240
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
1
2
3
