Plug-in Connectors for DISK Unit
FX2M3 Series
sFeatures
1. Plug-in Connector Equipped with Power contact
The total number of contacts contains 128 contacts, of which
120 contacts belong to the half pitch signal contacts, and the
remained 8 contacts are used for the power contact. The
power contact corresponds to the high current (7.5A).
2. Three-stage Sequential Structure
Considering the plug and play, 3 stages sequential structure is
employed.
3. Flux Tight
The signal contact area of the straight through hole type has
completely prevented flux swell due to solder dipping.
4. Bus Line Connection
The socket side connector allow to connect the bus line.
5. Floating Mechanism
The socket type employs the floating (=1mm) mechanism for
the panel installation.
Floating Mechanism
Bus Line Connection (Power Supply Side)
FX2M3-128S8-RC
Use Example
Bus Line Connection (For Signal)
Since the signal contact can be
engaged or disengaged, connection
The power contact allows to connect
the bus line.
c1 -------------- c2
c3 -------------- c4
c5 -------------- c6
c7 -------------- c8
Short inside the connector at every 2 contacts.
can be performed in combination with
the cable type and the terminator as
illustrated on the left.
A177