FPF2116 IntelliMAX鈩?Advanced Load Management Products
January 2006
FPF2116
IntelliMAX鈩?Advanced Load Management Products
Features
1.8 to 5.5V Input Voltage Range
Controlled Turn-On
200mA Current Limit
Undervoltage Lockout
Thermal Shutdown
<2碌A(chǔ) Shutdown Current
Auto Restart
Fast Current limit Response Time
3碌s to Moderate Over Currents
20ns to Hard Shorts
Fault Blanking
Reverse Current Blocking
General Description
The FPF2116 is a load switch which provides full protection to
systems and loads which may encounter large current
conditions. This device contains a 0.125鈩?current-limited
P-channel MOSFET which can operate over an input voltage
range of 1.8-5.5V. Internally, current is prevented from flowing
when the MOSFET is off and the output voltage is higher than
the input voltage. Switch control is by a logic input (ON)
capable of interfacing directly with low voltage control signals.
The part contains thermal shutdown protection which shuts off
the switch to prevent damage to the part when a continuous
over-current condition causes excessive heating.
When the switch current reaches the current limit, the part
operates in a constant-current mode to prohibit excessive
currents from causing damage. If the constant current condition
still persists after 30ms, the part will shut off the switch and pull
the fault signal pin (FLAGB) low. An auto-restart feature will
turn the switch on again after 480ms if the ON pin is still active.
The minimum current limit is 200mA.
The part is available in a space-saving 5 pin SOT23 package.
Applications
PDAs
Cell Phones
GPS Devices
MP3 Players
Digital Cameras
Peripheral Ports
Hot Swap Supplies
Typical Application Circuit
TO LOAD
V
IN
V
OUT
FPF2116
OFF ON
ON
GND
FLAGB
漏2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
FPF2116 Rev. B3