Data Sheet
FlatPAC-EN
TM
EN Compliant, Autoranging Switcher
Features
鈥?EN 61000-3-2 harmonic current compliance
鈥?Low profile package (1.4"/35,6mm)
鈥?Output power to 500W
(425W for EN compliance)
鈥?Up to 4 user specifiable outputs
鈥?"Autosense" feature
鈥?Compliant to EN 55022, Class A,
EN 55022, Class B (may require optional
in-line filter), EN 61000-4-4 and EN 61000-4-5
鈥?Rugged: Meets MIL-STD-810E for vibration
鈥?Drop-in upgrade to our 鈥?up鈥?FlatPAC
鈥?RS-232 microcontroller interface
鈥?Safety agency approvals: T脺V, cULus, CE
Overview
With a power density greater than 7W/in
3
,
Westcor鈥檚 FlatPAC-EN is an ultra low profile,
compact, EN compliant autoranging AC-DC
switcher. It is capable of providing up to 500
Watts from up to 4 isolated outputs.
For maximum versatility and flexibility, the
FlatPAC-EN can be configured with standard
Vicor DC-DC converter modules - full, half
and quarter brick sizes. These modules cover
the entire range of outputs from 1 to 100Vdc
and 25 to 500 Watts, as well as an array of
non-standard voltages. The optimum FlatPAC-
EN solution can be factory configured based on
your exact voltage and power requirements.
For conducted EMI, the FlatPAC-EN conforms
with FCC Class A and B, and EN 55022,
Class A and B. Some configurations may require
our optional external in-line filter to meet
EN 55022 Class B. Further, besides meeting
the cULus, T脺V and CE safety agency
approvals, the FlatPAC-EN complies with
harmonic current limits per EN 61000-3-2,
Electrical Fast Transient/Burst per EN 61000-4-4
and Surge Immunity per EN 61000-4-5. For
harmonic current compliance to EN 61000-3-2,
do not exceed input current of 3.33 A rms at
230Vac, 50 Hz.
1.4"H x 5.0"W x 9.2"L
35,6 x 127,0 x 233,7 mm
Up to 500W
1 to 4 Outputs
Part Numbering
FL
Product Prefix
FL
FlatPAC-EN
X
1
-
X
2
Number of
1st Gen modules
X
3
- XXX - E
Factory
Assigned
Extended
Temperature
Range Version
(Optional)
Number of
Output
Voltages
Number of
2nd Gen modules
Autosense Feature
*
This is a new feature implemented in all converter slots in the FlatPAC-EN.
If remote sense connections are not needed or are inadvertently not made, no
local sense connections are necessary. Simply connect the output(s) to the load
and the converter(s) will automatically operate in the local sense mode. If remote
sense connections are made, the unit will operate in remote sense mode.
*
Applies
to outputs utilizing Maxi or Mini size converters.
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
Westcor Division
408-522-5280
FlatPAC-EN
Rev. 1
Page 1 of 8
Set your site on VICOR at www.vicorpower.com
1
2
3
4
5
6
7
8
