鈥?/div>
2鈥揥ire Serial Data Input/Output
2鈥揥ire Serial Clock
Ground
Thermostat Output Signal
Chip Address Input
Chip Address Input
Chip Address Input
Power Supply Voltage
DESCRIPTION
The DS75 2鈥搘ire thermal watchdog provides 9鈥揵it temperature readings which indicate the temperature
of the device. Thermostat settings and temperature readings are all communicated to/from the DS75 over
a simple 2鈥搘ire serial interface. No additional components are required; the device is truly a
鈥渢emperature鈥搕o鈥揹igital鈥?converter.
The DS75 has three address bits that allow a user to multidrop up to eight sensors along the 2鈥搘ire bus,
greatly simplifying the bussing of distributed temperature sensing networks.
The open鈥揹rain thermal alarm output, O.S., becomes active when the temperature of the device exceeds a
user鈥揹efined temperature T
OS
. The number of consecutive faults required to set O.S. active is
configurable by the user. The device can also be configured in the interrupt or comparator mode, to
customize the method which clears the fault condition.
For applications that require greater temperature resolution, the user can adjust the readout resolution
from 9 to 12 bits. This is particularly useful in applications where thermal runaway conditions must be
detected quickly.
1 of 13
112299