DS2422/DS2423
1-kbit/4-kbit 1-Wire
TM
RAM with Counter
www.dalsemi.com
FEATURES
摟
摟
摟
摟
4096 bits of SRAM (DS2423), 1024 bits with
the DS2422
Four 32-bit, read-only counters (DS2423),
three counters with the DS2422
Active-low external trigger inputs for two of
the counters with on-chip debouncing
compatible with reed and Wiegand switches
Unique, factory-lasered and tested 64-bit
registration number (8-bit family code + 48-
bit serial number + 8-bit CRC tester) assures
absolute traceability because no two parts are
alike
Memory partitioned into 16 256-bit pages in
DS2423 (4 pages in DS2422) for packetizing
data
256-bit scratchpad with strict read/write
protocols ensures integrity of data transfer
On-chip 16-bit CRC generator for
safeguarding data transfers
Built-in multidrop controller ensures
compatibility with other MicroLAN products
Directly connects to a single port pin of a
microprocessor and communicates at up to
16.3 kbits per second
Overdrive mode boosts communication speed
to 142 kbits per second
8-bit family code specifies device
communication requirements to reader
摟
摟
摟
Presence detector acknowledges when reader
first applies voltage
Compact, low cost 6-pin TSOC surface mount
package
Reads, writes and counts over a wide voltage
range of 2.8V to 5.5V from -40擄C to +85擄C
PIN ASSIGNMENT
TSOC PACKAGE
1
2
3
6
5
4
摟
摟
摟
摟
摟
摟
摟
TOP VIEW
3.7 X 4.0 X 1.5 mm
SIDE VIEW
PIN DESCRIPTION
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Ground
Data
Vbat
NC
Input channel B
Input channel A
ORDERING INFORMATION
DS2423P
DS2423V
DS2423X
DS2422P
6-pin TSOC package
Tape & Reel Version of DS2423P
Chip Scale Pkg., Tape & Reel
Contact Factory
DESCRIPTION
The DS2422/DS2423 1-Wire RAM with Counters (hereafter referred to as DS242X) is a fully static,
read/write memory for battery operation in a low-cost, six-lead TSOC surface-mount package. The
memory is organized as 16 pages (DS2423) or four pages (DS2422) of 256 bits each. In addition, the
device has four (DS2423) or three (DS2422) counters, two of them with external trigger inputs called A
and B. Each of the counters is associated with a memory page. A counter without external trigger input
increments each time data is written to the page it is associated with (Write Cycle Counter). The counters
triggered by inputs A and B, respectively, increment with every low-going pulse on their input. All
counters are read-only. They are automatically cleared to 0 when the battery is connected.
1 of 25
090799