DS1233D
5V EconoReset
www.maxim-ic.com
FEATURES
摟
摟
摟
摟
摟
摟
摟
摟
摟
Automatically restarts microprocessor after
power failure
Maintains reset for 350 ms after V
CC
returns
to an in-tolerance condition
Accurate 5%, 10% or 15% microprocessor 5V
power supply monitoring
Reduces need for discrete components
Precision temperature-compensated voltage
reference and voltage sensor
Low-cost TO-92 package or surface mount
SOT-223 package
Internal 5 kW pull-up resistor
Compatible with Motorola 68XXX series and
HC16 Microprocessors
Operating temperature of -40擄C to +85擄C
PIN ASSIGNMENT
DALLAS
DS1233
Econo
Reset
1
2
4
3
1 2 3
1 2 3
BOTTOM VIEW
TO-92 PACKAGE
See Mech.
Drawings Section
On Website
TOP VIEW
SOT-23 PACKAGE
See Mech.
Drawings Section
On Website
PIN DESCRIPTION
PIN 1
PIN 2
PIN 3
PIN 4
GROUND
RESET
V
CC
GROUND (SOT-223 ONLY)
DESCRIPTION
The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to
monitor the status of the power supply (V
CC
). When an out-of-tolerance condition is detected, an internal
power-fail signal is generated which forces reset to the active state. When V
CC
returns to an in-tolerance
condition, the reset signal is kept in the active state for approximately 350 ms to allow the power supply
and processor to stabilize.
OPERATION - POWER MONITOR
The DS1233D provides the functions of detecting out-of-tolerance power supply conditions and warning
a processor-based system of impending power failure. When V
CC
is detected as out of tolerance as
defined by the tolerance of the part selected, the
RST
signal is asserted. On power-up,
RST
is kept active
for approximately 350 ms after the power supply has reached the selected tolerance. This allows the
power supply and microprocessor to stabilize before
RST
is released.
1 of 5
041002
1
2
3
4
5
